Hi everyone, I’ve started working on the Wherry Lines route (Norwich – Great Yarmouth – Lowestoft). I’m still not fully sure about the time period I’ll be recreating, but I’m leaning towards 2016. Some regulars here might know that I lost my entire map twice in one month and had to start over (the first time I had already laid down all the tracks). But I think I’m finally getting the hang of the editor, getting used to its quirks, and I’ve also sorted out proper backups now. I’d like to share a few screenshots from Fisher Row Level Crossing. All assets are my own, except for the foliage — though I’m working on that too. Please keep in mind that this is a very early version, and all the scenery will be updated and improved over time. I’m not completely happy with some of the trees available, and quite a few that I need are still missing. I’ll keep sharing updates in this thread. Next up, I’m planning to figure out how to integrate the stations and build Oulton Broad North. My goal is to make this a production-ready product of the best possible quality, so please feel free to share your thoughts and point out any mistakes — it really helps a lot. Thanks for reading!
Great work, loving the custom assets! I tried making a version of Norwich to Gt Yarmouth for TSW, but found it was too much of a time sink for me (compared to TSC), constantly looking for tutorials, scouring the internet for UE tips etc. Looks like you've got the hang of the editor, great that you can import your own assets. If you can make your own foliage, even better, I got bored of the same trees being used. The new ATS route however has used the foliage assets to the best they can be used imo, looks great, even by using the same 3 or 4 trees.
Hi everyone. I wanted to share the progress of my work. I’ve spent quite a lot of time selecting landscape materials — and I’ll probably spend even more — as well as looking for a solution for displaying the field drainage system. This task is not an easy one for me, so it will take some more effort to get it right. I’m also continuing to relay the tracks towards Norwich and working on close scenery towards Lowestoft. I’ll soon start approaching the first station, and I think that’s going to be interesting. I’m also increasingly realising that I need to invest in creating my own tracks and ballast — what’s currently available just doesn’t work for me. I can more or less imagine how to put together my own ballast (there have been some discussions about it on the forum), but when it comes to putting together my own signal views, I have no idea how to approach it at all. If anyone knows, please share. And another question: does anyone know if it’s possible to use virtual textures? I see that the checkbox in the project settings is disabled but not locked. It would be really great if that’s possible. And here are few screenshots of Prospect Road bridge. Still, this is work in early progress and many things can change.
The thing with the foliage is that master materials are hidden in public editor. So even if I make custom tree or two it'll be really hard for me to mach the look of the rest, simply because I don't know what they do in their shader. If I knew the rules, it would be much easier to make custom foliage. But that's me, and I'm not an UE guru. I'm about to hire one so he can take a look at what we can do. He is busy with another project at the moment and will be available later this month. So, we'll see what we can do.
Very promising project. If you can get DTG interested too. See if you could ask about using their Class 37 model to make an ETH equipped class 37/4. As during that time the main train was a 37/4 hauling a short string of Mk2s. Plus it would be nice to have another ETH equipped diesel thats not a class 47
Fantastic work, Alex I’ve shared your route creation post to the Train Sim World Community Facebook page. I’ve directed any feedback which players may have to this thread
This is fantastic work sir, I have travelled the wherry lines many times over the years and it would be fantastic to see it as a official product!
This looks absolutely stunning. I really hope DTG get hold of this once finished, and get it released!!! You're clearly putting in some serious work to build this - I hope DTG have a way to reward this work! ❤️✌️
Thanks everyone for such a warm reception. But, please, don't overhype. This is just a tiny peace of a route and I'm still in very early stages of development. Working on Oulton Broad North atm. Will get back in a week or two. There is so much to do.
Hi everyone. I promised to come back with an update on Oulton Broad North. To be honest, I slightly misjudged the amount of time needed, and unfortunately, not everything depends solely on me. It turned out to be quite difficult to find a skilled architectural artist. Now the problem seems to be solved and work on station building and surroundings continues. I haven’t been idle myself. The platform is more or less finished — well, almost — but I’m still undecided on the asphalt color, so I won’t be showing it today. I’ve also been working on the mid- and far- scenery. I don’t like showing unfinished work, but I also don’t want to leave you empty-handed. So here’s a small preview. I’ll try to be back next week with something more substantial. Made a screenshot in photomode and felt like the lamp post and conrete part of the fence have to be redone... Anyway, thank you for your attention
This is the one I’m looking forward to most of all, a great route in TSC especially the improved version. A nice length for a session too.
Does anyone have an idea how to create custom signals? None of the available signals fit into the route, so I have to create my own. I have no problems with modelling, but signal views look complicated. Need some knowledge on how to assemble them in the editor
Fantastic looking route, Alex! I'm loving the custom assets and particularly the custom 'new build' looking houses. I've shared your progress to the Train Sim Community Facebook group
Agreed, transforms routes from having that generic feel to something very immersive (new foliage assets would help massively as well). Keep at it op, you obviously have a knack to route building!
Thanks everyone for the kind words. The buildings are mostly the work of the 3D artist — I just stood over his shoulder saying “doesn’t look right” until it finally did. I passed along your warm welcome to him. Hopefully by the end of the week I’ll be able to share the Junction Box and a couple more buildings around the station that will conclude visible immediate surroundings of the platform. And only the station itself will remain undone. I didn’t want to move on to the station until we got some practice with the other buildings first.
Awesome, looking fantastic so far, travelled on this route many a time, local route to me and great to see some of Great Eastern Network in TSW Keep up the good work, and look forward to seeing your progress
Roads, pavements and level crossing defenitely need more attention and decals But I like the junction box and Hayden House and wanted to share them. Hope you liek them too. Also, I’ve heard through the grapevine some things about this route that make me think it’s worth checking in with DTG sooner rather than later. Does anyone know the best way to get in touch with them? I sent them an email about a month ago and followed up two weeks later, but haven’t had a reply. Maybe it got into spam.
Spoiler: RUS А почему ты решил именно британский маршрут делать? Судя по всему, ты русскоязычный разраб Impressive, good luck in further development)
Spoiler: RUS Много почему. В основном просто потому что мне нравится местный вайб, а плюсом я не проживаю в России и добраться до UK мне даже проще, если нужно будет съездить за рефами. Но над российским маршрутом я тоже подумываю. Посмотрим как оно вообще пойдет. Thank you! Much appreciated.
If you still need help with signals, cActUsjUiCe made a very useful tutorial where he explains in great detail how they are set up here: I still haven't got mine fully set up, and It has been a while since I was last working on them, but my current understanding is that the signals' blueprints check if they are part of assigned route, and then poll the next signals to determine what aspect to display, and are not otherwise effected by the game itself. In the blueprint, you can check the status of the next switch, for when you want to display diverging indications. timers in the blueprints can be used for timed sections, or that sort of thing. the lamps are "lit" or "turned off" by changing values in the material instances you use in the lamps, again, via the blueprint. I'd show you my blueprint setup for a lamp, but I currently have mine "turning on" over and over for debugging. You should have seen it in "disco" mode! Seriously though, that's some beautiful work. Best of luck!
Very, very impressive work. Well done I used to work next door to the signal box at Lowestoft in the late eighties. It was surprising how busy the line was with freight in those days. Plus, of course, the through trains to London usually hauled by a CL31 or a CL37. Happy Days.
Thanks! I'll try it this way. DTG Jamie I hope you don’t mind me tagging you here. I’m trying to reach DTG regarding third-party development and would appreciate any advice or the right contact info if possible.
