Route Morristown Line New York & Hoboken - Dover - Feedback

This is beautiful traffic density but one column on each side is driving on the wrong side of the road. Just need to be shifted over and it's perfect in my eyes.

 

I am pretty sure this is supposed to be a split highway (each side going one direction), if anything there probably shouldn't be a yellow line on the road. Common issue in TSW road markings.

 

You are correct on that . I believe that is route I-287 which is already previously filed on a Jira

 

Next time, please don’t preface the Journey mode with five introductory demo/training runs three of which were around the tedious Training Centre. Keep those separate for those who wish to make use of them.

And in the name of all that is good, stop switching the bl00dy coloured stop markers and objective cones back on each time on a training run. If I want them on, I’ll switch them on myself.

 

Hi vern how you find the alp46 alp45 and cabcar no matter what I do the brakes are always on a tiny bit even when fully released really slowing me down.

 

yeah I rewatched it later and there it was

 

Not sure on that one. You have definitely pushed the brake cut in button? Otherwise all I’ve done so far is the silly once around the Training Centre. Also might be worth holding in release for a few seconds, keep an eye on the gauge needles.

 

Brake cut is active all gauges are how they should be. Happened on the training as well.

 

my ALP46 shows 16 kV as voltage at NY Penn for some reason, will try a different service and see if it helps

edit: update - first off, the voltage is shown as 16 kV all the time, when it should be 12 and then 25 going from NY Penn to Dover... the power does cut out at the appropriate spot (which I noticed by seeing dynamic brakes cutting out temporarily)... and other thing, having watched some streams, the loco selector shows NEC NY Trenton instead of Morristown, which might be just menu bug, but dunno... atm I am redownloading the DLC and see if that clears these issues (or it could be some early access bug/s)

 

PS5

6237 Sunnyside Yard - NY Penn Station

Train interior gets stupid bright when entering the tunnel.

Random floating time display.

The track is all messed up.

 

just checked Matt's stream and he also has only NEC NY Trenton variant of ALP-46 in the selection... looks like that one is missing some functionality necessary for this route (tho as I remember the announcements worked, kinda?)... dunno, kinda confused now

 

another update - reinstalled this DLC, and now only the Morristown variant shows up in menus ... even when checking NEC NY Trenton selection, which is weird, but ok... at least now the voltage thing seems to work

 

This is exactly how it is in reality but I understand how this might catch a few people off guard if they didn't watch or missed that part of the preview stream

 

#6647 seems to have 2 services. The Summit one is supposed to be #6341

 

Just one more thing, a fair portion of the Dover yard moves aren't avaliable to operate as a player train and are AI only but some I can select, I have no idea why this is XD

 

the PIS issues was previously filed on the Internal bug system (Jira)

 

the ALP46 voltage and NYT ALP46 showing as the only ALP46 available issues were previously filed internally on Jira

 

thank you for your feedback. I have filled a Jira ticket for this issue

 

I totally missed the preview stream! Well, then it's not an issue at all.

Thanks internet friend!

 

Is there a Jira ticket for the HEP cabling on the 45, 45 and multilevels missing a wire? Additionally for the multilevel issues I described earlier (Trapdoors purely only functioning based on location of train rather than the "high" and "low" buttons on the door panels?)

 

6668 dover - New York. Stuck red light on Newark, I got stuck at a red signal, and I wasn't alone. Ahead, there were about 10 AI trains stuck on both tracks. Deleting the trains didn't switch the signal. It was as if the signals themselves were bugged.

 

Patform PC

I can’t change the contrast or brightness on the multi panel purpose display in the cabcar (the screen in the top).

 

Same on xbox x

 

there's ajira for the Multilevel door operation. can I get more information on the HEP cabling

 

thank you for your feedback. I have filed a Jira ticket for this

 

thank you for your feedback. I have filed a jira ticket for this

 

Basically on all standard US passenger cars, the HEP cables are two pairs of cables, one on each side. But the MultiLevels (And NJT locos) only connect one jumper on each side. Can also be seen when attaching an ALP-45 to a non-NJT coach. This has been an issue since NYT and am surprised that it was never fixed/corrected for the Morristown versions. See the image which I have annotated.


Additionally on MultiLevels, the gangway barriers on the Morristown versions are unclickable which is a problem for interoperability as some passenger cars don't share the same Gangway IDs despite them all being able to connect with no issues IRL. But currently even if the barrier is raised the collision is still disabled which at least still would allow the player to move between cars.

 

Not sure if this bug was already mentioned, but for the ALP-46 and Multilevel cab, the exiting ASCES/ASES territory alarm has no sound so unless you have the HUD on, so you will be penalized with no warning when required to press the ack button.

 

MAX1319 Just ran the 6668 myself and you get stopped behind another inbound train just short of Newark Broad. Went into the map and looked at trains ahead and they are stacked up at Carney. There are favorable signals ahead of the first train in the que. Continued tracing the route into NYP and there was a Dover - NYP train stopped just short of the platform. I deleted it as possible cause of all the issues, but this caused a UE crash.

 

I’ll be honest this one is going be a hard one to figure out. Sometimes just spawning 5 minutes before would make a difference. I know is ideal but might want to try spawning 5 minutes before the service starts and playing the service that way

 

I will give this a try. This service starts outside of Dover, and you bring the train in, so will give myself maybe a little more than 5 minutes so I can walk to where it is stopped