Hi, No this is not because I'm an idiot and I didn't reset the engines. Whenever I seem to stop at a certain station and I depart, I don't seem to move. This happened on the preview at newton abbot, any chance you could fix this for the 30th?
It's a known issue at the moment - if you go to emergency break - you can't release them - its awaiting a fix, but for now avoid the emergency break and you will be fine.
We are aware of a issue currently on this but here is a work around for now : Basically, set cab A PBC to off, reverser off, and key out. Then head to the other cab, Key on, reverser forward, release brakes and apply a little power, you should move, bring the train back to a halt, PBC to off, reverser out, key out and go back to the cab you were in. Set the cab up as normal and you should be able to get a brake release.
I have a similar problem following reloading after a save. I wasn’t even in Emergency Brake, just gently breaking on the approach to Totnes station (towards Exeter). When I reloaded, I could not get it to power, basically the little box by the speedo remained red. I stopped the train then tried this workaround but nothing. I even shut down the engine and started it up again to no avail.
