PC Ts World Raildriver And Joystick Interface

Ich habe das Problem, dass ich das Programm nicht geöffnet bekommen habe, hat dass jemand auch das diese Meldung kam?

Ich habe die PieHid64.dll aus den Default Settings bei dem Zusatzprogramm schon da bei TSW6 in dem Binaries Folder schon reinkopiert bzw. ersetzt

 

Have you installed all required software? Direct X and .NET? Etc?

There is a YouTube video about how to get it all working, id say Check that out and try again.

 

would you be willing to share?

 

Happy to share the files if you can advise how to send them!

 

I'm having the same problem. I've ensured NET and DirectX are installed and manually replaced the DLL file in the TSW6 directory. I've tried launching the program without antivirus and as Administrator, but it just gives me that same error.

---------------------------
Update Required
---------------------------
is running and
the PieHid64.dll needs updating.

Stop
and restart this program for the update to continue.
---------------------------
OK
---------------------------

 

Quick update. I have both TSW5 and TSW6 installed, and I originally made the changes only to TSW6 (and got the error message I posted in the previous message). I just went in and updated the DLL for TSW5 also, and now the application works.

 

Hey, ich habe genau das gleiche Problem/e. Entweder wird sich beschwert das es ein Update brauch, dann das es irgendwo fehlt!? Der Controller wird beim Kalibrieren sogar erkannt aber man kann nicht einstellen oder sehen. Ich verstehe es nicht so ganz, aber ich bräuchte Hilfe.

 

Bonjour à tous, j'ai un problème avec l'interface. Le jeu ne se lance pas et affiche un message d'erreur indiquant que le problème vient du fichier « loco's.txt ». Le message me demande de supprimer le fichier et de redémarrer le programme, ce que j'ai fait, mais rien n'y fait et je ne comprends pas pourquoi.
Quelqu'un peut-il m'aider, s'il vous plaît ?

 

Same exact problem here. Net and DirectX installed as instructed, but no matter what I try I always get this screen the instant I try to launch the application.

 

I just installed this program to work with TSW6. I ran a LIRR train, and the power lever kept clicking from 1 to 2 and back again. Is this just an issue with the Raildriver and it's throttle lever? I finally unplugged the Rail driver and used the A and D keys to adjust power.

 

Works fine for me.

 

Hello CobraOne, I use your famous Ts World Raildriver And Joystick Interface with TSW 6 and it works very well. Many thanks for your work!

In the manual of your Ts Classic Raildriver And Joystick Interface I read about a possibility of modification the notches of the levers with an “c” before a Notch Value to make it work continuous in a defined position. I tried this in the Ts World…Interface, but it doesn’t work there for me. I would need it for the BR612. The throttle lever has to be held in the full throttle position to count up the steps of acceleration. It doesn’t work with the interface, but I think it would with such a continuous function. At the full brake position, it is curiously no problem without the “c”. There it works perfect out of the box and counts up. My question: is it possible to implement the “c” function for the notches in the Ts World…Interface? Perhaps in the next version? It would be very helpful. Thanks!

 

Hello, I am having a problem with Raildriver in TSW6. I stopped playing the game some months ago, and today I wanted to start playing again, but the calibration of the raildriver is off (it was working perfectly last time I played). The levers can't reach the full lenght. I tried Derail Valley and it is working ok with that game. Does someone know how can I recalibrate it for TSW? Thank you very much.

 

Yes. I am unable to get levers to work but buttons seem OK. This is on the 86/87, 47 and 08. the 142, 101 are working fine. I have not checked original timetable, but will do so shortly. I am also now having the problem on the new updated Great Western Express which arrived this AM 6 Feb 2026.. I only ran the Class 350, but again, the levers are not working for it.

Help from anyone would be appreciated.I have looked at other related posts and attempted any suggestions, to no avail.

07 Feb. The 47 works on the original timetable, but not the 86/87. This just seems so odd. I would be fine if even the brake levers worked. . .

08 Feb 2026. I have confirmed the 484 does not work for me in the GWE Remaster. ( Both work in their original routes and timetables 350 on WCML Euston-Milton Keynes and 484 on the 2022 Island rebuilt line) Since neither was in earlier timetables on the GWE route there is no way to know if they would work there except in free roam or the like. I have also confirmed the Class 87, but not the Class 86 works in the Preston to Carlisle route on the original timetable. I suppose this makes sense as the 86 was a later add-on loco.

 

I am having the same issues with the raildriver for the class 350 on GWE remaster, same with the 484, all the other trains on the remaster seem fine for me