Route East Coastway Remastered Feedback Thread

The 700 is the same as the 377/2 when used on ECW Remastered and spawns in AC mode so you have to manually change it to DC power. With the 700 that means you just change the mode switch from auto to DC and the Power Supply switch to On.

With the 377/2 from WCMLS you do similar and press the DC mode button on the upper left panel from memory.

 

Ah ok, thank you.

 

1G06 the 0745 from Eastbourne to Brighton, has a "Go via London Road" waypoint.

Approaching it, you'll get an announcement that the train is approaching Brighton.

A few seconds later you'll get an announcement "This is London Road" followed by "This is the Southern service to Brighton, the next stop is Brighton." Despite the service not being scheduled to stop at London Road.

 

Also happens all the way through the bridge strike scenario. Numerous train announcements when passing through stations as though you have stopped at them.

 

There are announcements on The PC and PS5 (soz dont have a PS5 pro). At Brighton they apparently do not announce inbound trains, But on the route Station announcements are usually made about 5 minutes boefroe the train departs or arrives. You do get to hear some announcements. I have heard them. But they are faint especially if you have the on board announcements going off off at the same time.
The announcements on ECW will be looked at as well apparently.

Hentis

 

Thank you

 

As much as I love this remaster having played it now for many hours, the thing that really lets this down very much is the ECW version 377/4 (as well as the 'brand-new' 377/3 being exactly the same) featuring poorer sounds and unrealistic PIS.

There's also a couple other frustrations which I'll list in detail for feedback once I have more time.

 

Thank you! That's solved the issue!

 

DTG Harry hi Harry when can we expect a patch for route now. Thanks

 

so 2018 is the one that the remaster adds and 377/3 timetable is the one you get with the 171 / 377/3 pack?

 

Both come with the 171 and 377/3 pack

 

anyway, two little things I noticed just now that I'm doing 313 service to Seaford:
1) if you hit L key aka Cab lights, it clears AWS light
2) it has DSD (no Vigilance switch tho), so it doesnt do the vigilance beep? I mean, even on longer stretches where you dont move either throttle or brake, no beeps... is this intended?

edit: regarding no.2, I have read in other threads that you can turn on DSD, it wont have audio, it wont do any penalty thingies... and that by just sitting into driver's seat, it is taken care of? I mean, I can hear metal clink sound when I sit down, is that the sound of pressing the pedal?

 

The 313 was never fitted with the Vigilance device, it was added by mistake, even without the audio. What the button does though is activate the DSD device so the driver has to help physically pressing it down.

 

so the sound you hear when sitting down in 313 is the pedal being pressed, kinda?

edit: so what does the DSD do in this case in-game? like, if I stand up while in motion it is going to beep? or is it just cosmetic here

 

sorry for more posts, but I keep posting as I encounter stuff - I just noticed a weird thing about 313 throttle delivery... as you keep going up from Off through notches to notch 4, everything is normal... but then as you go down, it kinda stays like in full power until you hit Off, which cuts the power... and then if you go up again, it takes a bit to kick in... is this how it is supposed to behave?

 

Yes, that's how the control system works in the real thing.