PC Ts World Raildriver And Joystick Interface

massive shame that this thread will be gone forever this time next week, with no suitable alternative for where else a new one could be started

 

I'm aware of the announcement that changes are going to be made to the fourms, but how do we know for sure this thread will be gone completely?

 

I was never able to install it automatically but I did manage to do it manually.

Works pretty well with the Logitech Quadrant although I can't get a good braking configuration for the Class 66. For a train with a combined throttle and brake it's perfect.

 

If you need more complex configurations and mappings you can always use the TSW Controller App (https://tsw-controller-app.vercel.app/)

 

Has anyone been able to use this program with the new GP60m? I'm trying to use it with a TSC-X, when I move the throttle down, once it gets to notch 4 the dynamic brake kicks on , goes all the way to full, and the throttle goes all the way to zero. I've tried using a few different "enabled assets" but it can't get it to work. Not sure if it's a core issue with how hardware support is set up in the locomotive? I haven't seen this behaviour in any other american diesels before. Thanks.

 

I am having the samer problem but with the Raildriver so it must be in the GP60M's set up.

 

Thanks that’s helpful, I’ll post in the feedback thread then.

 

How were you able to do it manually?

 

I own a TSC-X too and I used it on the gp60
but I did not try it out on both trains yet only one version
and it worked fine
I did follow this this tutorial
TSC X Setup for Train Sim World (TSW) Tutorial
and created new lever mapping and button mapping
I am sure there are better ways out now on how to configure it and such

 

Oops … operator error. I just had the wrong profile loaded…. Since the GP60M is a new(ish) locomotive Cobra’s software just went with the default loaded…

 

hehe that are the greatest errors
glad you got it working

 

What profile are you using with the GP60? I tried a bunch but couldn’t find one that worked properly.

 

The AC4400CW works well with the GP60M

 

Thanks I’ll give that a shot!

 

CobraOne

This tread started by DTG on Raildriver potential fixes is interesting :-

https://forums.dovetailgames.com/threads/raildriver.98586/#post-1131708

 

I tried the CCS AC4400W & the SPG AC4400W profile and it has the same issue of being at notch 4 in idle. Not sure what could be the problem since yours worked so I refunded.

 

So this is a long time problem I have been having with TSW Raildriver abd Joystick Interface V2.0.1.5 is that it seems ro hang on numerous occassions. Only error message i get in Windows Application log is that it hung ang I closed it :

Log Name: Application
Source: Application Hang
Date: 7/4/2026 9:34:54 AM
Event ID: 1002
Task Category: Hanging Events
Level: Error
Keywords:
User: SYSTEM
Computer: New-VRMachine
Description:
The program TSW Raildriver And Joystick Interface.exe version 2.0.1.5 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Security and Maintenance control panel.

Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Hang" Guid="{c631c3dc-c676-59e4-2db3-5c0af00f9675}" />
<EventID>1002</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>101</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2026-07-04T14:34:54.2726949Z" />
<EventRecordID>29033</EventRecordID>
<Correlation />
<Execution ProcessID="42344" ThreadID="53636" />
<Channel>Application</Channel>
<Computer>New-VRMachine</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AppName">TSW Raildriver And Joystick Interface.exe</Data>
<Data Name="AppVersion">2.0.1.5</Data>
<Data Name="ProcessId">0xa7b8</Data>
<Data Name="StartTime">0x1dd0bbccf04884d</Data>
<Data Name="TerminationTime">26</Data>
<Data Name="ExeFileName">F:\TSW Raildriver And Joystick Interface V2.0.1.5\TSW Raildriver And Joystick Interface.exe</Data>
<Data Name="ReportId">e0d6b06c-4490-4f6d-a67d-005338ddade3</Data>
<Data Name="PackageFullName">
</Data>
<Data Name="PackageRelativeAppId">
</Data>
<Data Name="HangType">Unknown</Data>
</EventData>
</Event>

When I close and restart the interface - the Raildriver immediately shows the spped, but states it is waiting for TSW which is all ready running and in an activity timetable or scenario. After a while it will reconnect without any further fiddling with me - almost as a timeout has to expire. Anyway - if anyone else has had this problem or knows of a fix or workaround - I would appreciate it

 

If your using anything other than a raildriver I can not recommend enough as Liah has mentioned previously the TSW Controller App, once you wrap your head around setting up the profiles you will have no more lever issues again. You can control the lever by sending direct values to the game with infinite control over when those values sent, it requires a little more in the way of setup for each loco but the level of control transforms the experience.

I use a mixture of that and Cobras software, I use TSW Controller App for the levers and controls where there is no keyboard assigned (and to also split some like the AWS and Alerter, it annoys me that sometimes I cant just use the reset that I wish to as both a tied to 'Q') and I use Cobras for assigning keyboard keys to switches or buttons (its ability to copy button maps means you can have a pretty quick setup for keys that are consistent through different locos / trains.

I just want to say that Cobras software was revolutionary and if you are using a Raildriver is still the best for purpose at this stage and having been a user of Cobras software since the beginning (in fact it was his TSC software that prompted me to build a custom controller) I am very interested to see the new software he is working on that uses the api

 

the H2 version works with raildriver
but it is the H4 that will not work with raildriver
sometimes it moves throttle and dynamic (in the cab) at the same time when pulling or pushing the combined throttle/dynamic lever

 

i thought the same until I changed the profile in Raildriver to the AC4400. Did a couple of runs and the Raildriver and GP60M played nice with each other.

 

which AC4400 did you select?