Guys, Lots of new options here in TSW7 & I'm not really sure what to use to optimize my experience based on the hardware I have. A quick refresh: 5800X3D with 32GB of RAM Sapphire OC'd 7800XT 16GB at 2560x1440 @ 144hz Main OS & TSW7 both on NVMe drives I used to run JetWash's display mod with everything else on 'Ultra' except the sky (his recommendation). With all the new options available in the display settings, I'm not sure what's a good starting point for my hardware. #1 - Should I be using FSR? If so, what FPS limit? #2 - If not FSR, I'm assuming FXAA is better results than TAA for standard AA operations? #3 - At my current resolution, not even sure where to begin regarding screen percentage. Any base suggestions would be greatly appreciated. I'm taking these first few days to try and dial-in my setup here with the sim as close to 'vanilla' before I start trying to put any mods back in.
Good morning, We do have a dedicated guide to graphical settings, which should walk you through the individual settings and explain their meaning. You can find the guide here: https://support.dovetailgames.com/hc/en-us/articles/29719662434962-Train-Sim-World-Graphical-Settings-Guide Given your high-end hardware, you should be able to run the game on the Epic preset and, depending on your preferences, finetune the individual settings to your liking. Most of these can be changed during gameplay, so you can pause the game, make a change and see the effects right away. All the best, Jan
I don’t know AMD particularly well, but you should be using FSR and frame generation and that should just set your screen percentage to 100 and lock it. Let it do its thing. Enhanced lighting will be fine and I can’t see any reason why you couldn’t use Epic, but try it and as Jan says, you can tweak the settings if need be. Shadow settings to Ultra the view distance to Ultra would probably be the two with the biggest impact.
If I choose to to upscaling, should I drop my resolution to 1080 and let the upscalaing bring it back to 1440? dtg_jan - Thanks a million for that guide! Also, I don't run the full AMD Adrenaline software suite on my system, just the bare driver. I felt wholly overwhelmed by all the options there in the custom controls section after being on Nvidia for almost a decade.
Hi. Ive been using a 'universal' mod from TSW5 and 6, mostly based on Jetwash's work but personally tweaked for my own preferences, such as lens flares, passenger density, colour grading etc. Most of that is obsolete now with the new TSW7 and im hugely grateful for it and all the work done there. Its incredible. With the Omnimod it took a fair chunk out of my processing power and frame rate, but this current TSW7 upgrade just sails through it all with no impact on my PC. Utterly stunning. There are a few things I'd like to amend though. I seem to have lost the long track shadows. They now appear a short distance ahead of me, instead of in the long distance like before with the previous ini file settings. There are some shaders that refuse to stay in place and continually pop in, such as on overhead cable pylons. Is there a way we can adjust these again, even using the engine.ini? Huuuuge thanks once again.
I just wanted to give a quick update after a number of hours of tweaking yesterday. #1 - FSR is definitely a no-go. It was tanking my framerates down into the lower 40's even while standing still on foot in a busy station. There was constant 'sparkly' artifacts going on, especially on the rail surfaces, ballast and the edge of windows on the trains. #2 - I was able to run the 'Epic' preset with enhanced lighting just fine while keeping the resolution at 1440p, locking the FPS to 60 & using TAA in windowed fullscreen mode. It would drop to around 48 FPS or so in busy areas. I'm still doing base runs on the new routes to build up the shader cache (as I did a clean driver install on my card the day before the early release). I'm quite happy with what I'm seeing so far. The amount of texture pop-in is massively reduced, compared to previous yearly releases.
