Platform: Xbox Series X Experiencing crashes when departing Clapham Junction towards London Victoria from Brighton on both Southern and GX services. Does crash after 30 seconds of departure. Have tried multiple services from Brighton to Victoria but has come to the exact area of crashing, that’s even with all safety systems on and off. It runs fine from Victoria but from Brighton it just either crashes/freezes or force quits the game.
Could you provide some more details? I.e. what service did crash exactly (head code and/or time of departure would be useful), weather setting, and other details (for example, was that your first run or did you get to brighton first on another service). I never had a crash on Series X (and I have completed ~30 BML services and +50 Riesa Dresden services) and I'm quite curious to reproduce some myself.
Xbox Series S Leipzig S-Bahn 2017 Timetable Menu. Went to choose a route out the timetable. Went black then into the Microsoft main screen. But went back inside the the Timetable Menu and it worked the 2nd Time
What platform are you on: PC Route/loco: Peninsula Corridor / F40PH-2CAT Service/scenario: 288 San Francisco to San Jose 18:57 Location of crash : At the entrance to the South San Francisco station
What platform are you on: PC Route/loco: Peninsula Corridor / MP36-PH Service/scenario: 366 San Francisco to San Jose 16:37 Location of crash : Approaching South San Francisco station This has happened on at least 3 separate occasions to me, each time with a different service but always in exactly the same place. I have the Baby Bullet DLC for this route but not the MP15.
doomedcookie - do you have autoload journeys on? is the crash always on your SECOND time in a service/scenario/tutorial - or can you make it break on a *first* time in after loading the game up fresh? Note: autoload will confuse this as you will always load into something before you exit out and back, meaning most of your "first" will actually be a "second" so if you can turn off autoload journeys in settings and then let me know. i'm out this weekend but will catch up with some tests after I return tomorrow night.
Xbox one London Commuter BR 377 May custom weather (bit of wind and cloud) Can't remember name of service. Started sometime around 8 ish from 3 bridges to London Victoria (coming from Southampton). Game crashed about 0.7 miles from Clapham junction EDIT: repeated this service with similar conditions doing roughly the same thing. No crash at all.
For providing video evidence (for future carshes) is it ok to DM in Discord as the forums only allow a small file size or link to YouTube video.
Discord is fine Or just put them on youtube in an unlisted file, or put them on drpobox or onedrive and share the link. Whatever is easiest for you
If you use the xbox app you can share a clip loaded into xbox network as a link First you select captures Then you select what clip you want to share, and then press "copy link" For example here are a couple of clips of me recreating the crashed at London Victoria from loading two services consecutively described by shimarin https://www.xbox.com/play/media/R5QCYR38 https://www.xbox.com/play/media/RCX9XA8B https://www.xbox.com/play/media/ZAFGNV28 The xbox app is available here: Android || iOS Not sure if the desktop xbox app (or console companion) has this feature though.
PS5 Quarry line scenario First route to play since booting up game,as soon as it shows me standing on platform game crashed when I moved towards train. Happened 13-2-2022 Game is at 58gb Haven’t got any custom leveries installed Don’t use auto journey
Thanks for the offer! I'm here to help. What platform are you on: PC/Steam Route/loco: All passenger routes behave the same. All timetables within the impacted routes behave the same. For reference, I have documented details for three of the crashes here. The freight routes are crashing too, but differently so I intend to put them in their own thread. I suspect, if this gets fixed, then they will work also. Route=Therander Rampe /loco= BR-185RP/ service=Timetable 85302 Boston Sprinter / ACS-64 V AMTK / N.E. Regional #93 Schnellfahrstrecke Koln / BR406 DB /ICE 14 Location of crash: Explore--> select loco--> select timetable--> Crash. The Dxdiag report (text file) is attached to this post Sir, my entire TSW2 has become inoperable. One day things were great, the next day - I have this. I *might be able to correlate this with a windows update, somewhere between 8 - 10 Febuary, 2022. (maybe, not proven, in progress) I will check my forum profile to be sure my email address is there. Thank you.
This really feels like a mod or driver or something rather than the game - if everything was crashing like this the forum would be alight with player problems. Can I confirm you have completely removed all mods and engine ini changes and reverted the game back to completely vanilla? Have you checked your graphics driver version and seen if there is an update? If you look back through this thread somewhere there is an outline of how to find your crash dumps - if you can ping them over to me I can see if they help at all. Matt.
Platform: PS4 Route: Sherman Hill (But might happens on Sand Patch Grade) I have experiencing a new problem, I do no have before the last updates! When driving a long train - so usually US freight ones - , and try to change external camera view to the end of the train, then the game after few seconds crashed! There is no error message it kept "frozen" in one of the community's winner of screenshot images! So I have no other chance but to shut down the PS4. This have happened to me several times, so now I can not do it anymore, because I lost all the time and ride I have been doing at to that point of the route. As taking about camera view change, it will be much better if the first time you change from both front to rear and vice versa, it takes you to the free moving camera. Nowadays its change first to he special camera view with specific around movements - sorry I no not remember the name of it. So for example when you cross a train, and would like to see at the back, you have to make the camera view change 4 times! First 2 times with that above mentioned camera view, which it moves slowly, - so you miss the other train for sure -, and then 2 other times to change to the free camera - which first goes to the front of the train - and finally the end of the train one! That it is really annoying. Furthermore, I have noticed some times when you change the camera, it get stuck to the window of the locomotive, so you have to press the camera change more times, to get it free. Please change this as mentioned. I believe will be most useful for PS4 players
Short info: Every Crash that is related to the "Retry NOT successful"-errorcode is caused by corrupted game files through an update. Somehow updates corrupt the game files at random occasions, so the solution here is pretty clear: Verify your game files. This info might be relevant to look into TrainSim-Matt
PC-Steam Clinchfield Jorneys CRR 126 Southbound Manifest. SD40 After making the struggle uphill, passing 30 mph limit and going through the first three-track section. I think almost halfway to the first intersection from the east. Could be, if I restart, I could make it.
I've just run this one by the engineering team and as suggested earlier - this is an internal error from Unreal Engine 4 which is saying basically "i tried to read some data from a pak file but its corrupt" so it fails and crashes out. There's not much we can really do about this in the game unfortunately. It means that Steam has not updated your files correctly and left your with corrupt pak file(s) and therefore the solution is to validate local game files. we are going to look at putting in a more helpful message for this so it tells you what you need to do but in the mean time, that is exactly what this error means - re-validate local files, they're corrupt. Let me know if you need help doing this! Matt.
Just tried the Slow Way Home scenario again on London Commuter (PS5) and once again the game completely crashed. I have submitted yet another report via PlayStation. Maybe one day, I’ll get to complete one of the London Commuter scenarios.
TrainSim-Matt Can you tell us how to zip up the file and sent it to you, because i don't know how to do this step by step? Thanks
You do realize that you are suppose to put it here and you also don’t need to tag him as he checks this thread regularly
No, I don't, also this is my first time doing it. I don't know if I did it correctly. How do you do if I want to post it here?
Another crash for me Route: London Commuter Platform: PS5 Loco: Class 377 Service number: 1Y09 Tattenham Corner to London Victoria (loaded from journey mode chapter 6 a bag of all sorts) Details: Right near the start of the journey, service started at Purley, then arrived at Purley Oaks. Once the train left purley oaks and started gaining speed towards South Croydon game just crashed out of nowhere. Sent crash report to Sony Not loaded from a save game. Other DLC installed: Haupstrecke Rhein-Ruhr, ECW, Peninsula Corridor, Isle Of Wight
Was this the first thing you'd done since loading the game? and do you have auto load journeys turned on?
This was the first service that i did when starting the game up however i may have gone into another map to check something first. Auto load journeys are turned off. I`ll try again tomorrow and make it the very first thing i load up and see if that helps. Ive had two crashes so far on London Commuter PS5 and they have both been in bad weather with the wipers on full blast, the first one was a service in fairly heavy snow and the service above (1Y09) was in heavy rain. Probably nothing but thought id mention it.
Agreed. I cannot speak to all possible "mods" since I don't know all of the ways one of those might get created. I personally have never created or performed a "mod" of any sort, nor edited any ini file belonging to this product. I just drive the trains. I have no interest in how it works until it breaks and I am forced to. Thankfully there are helpful people like yourself around. I found them. It appears each crash creates a directory containing an XML file, a .dmp file, and an ini file. Which one(s) do you want? Can you help me out please with "ping them over?" Do you mean attach them to a reply in this thread? Or something else? Matt, your assistance is greatly appreciated.
Ah ok - so as noted above "retry was not successful" is an indication of a corrupt package file, there's not much we can do in the game to handle corrupt files. Do a steam verify local files and this should rectify it for you. Not sure what causes it, something not quite right in steam's patching algorithm sometimes perhaps. Matt.
What platform are you on: PC Route/loco: Bakerloo (Assuming the newly reskinned 72 stock) Service/scenario: Test Run Journey mode run (The first of the new one's included with the New Journeys pack) Location of crash Crash happens when trying to load the run before even starting it. I've attached a copy of the crash files. I tried running this run twice but got the same crash each time whilst it was loading.
Xbox one SKA DB BR 406 ICE Weather: May light clouds with custom wind Service: Frankfurt (Main) Hbf at 11:40 (ICE 15) ( new journeys expansion timetable) Crash occurred just before 60kmh comes into force when approaching Köln. Out of memory error message appears.
PC LGV Route Scenario Marseille return. Shortly after the power change location, Details: I run this using the cruise control. Shortly before, I think I forgot to set the reverser to neutral for the power system change. I corrected that,to be able to use the throttle again. I set the throttle back to max power.I just put the cruise control back to 130km/h for the approach of Marseille and then the crash happened. I do not make recordings of my gameplay. Please find the crash report attached as well as the last checkpoint save file
Platform- Ps4 Koln- Aachen (with New journeys expansion installed) Service- 12:16 RE9 Siegen HBF (Talent 2) Month & Weather- February, full rain, wetness & cloud Details- after completing the service into Koln and returning to the menu it crashes. This is the second time this has happened. The first was an ICE service.
Platform- PS4 Route- Koln- Aachen(with new journeys expansion installed) Details- I wasn't even in a route, I was scrolling through the train selection menu, hovering over the ICE 3 and the game crashed.
I experienced a crash in SKA on PS4 with the first ICE service of the timetable, I’ve done all the service until Köln and after completed it by clothing the doors, the game crashed. I was in 3rd person. ICE 11? For Frankfurt (main) HBF
Sherman Hill PS4 SD70ace Any Service/Location When passing another train if I switch from the cab cam to the rear camera the game crashes. PS4 error code (CE-36329-3) 02/19/22
Hello TrainSim-Matt .I Have send you my crash files and my Ticket Number off Dovetail Suport. For me I done all what you sayed.I have a vanilla TSW 2 all Windows and Nvida Drivers at the newest stand. I had verify the lokal files. I am on Pc Windows 10 , but I have alwasy only on London Comuter and only in the Timetabel crashes. All other Routs worked fine. So I can load London Comuter an play the Scenarios but not the Timetabel. What can I do. I have no idear . Pleas can you help me. Best regards Michael Janotta
Dresden Riesa on PS4 My game crashed doing a IC service at Dresden Neusdadt, now the game says my saved data are corrupted and can’t reload my profile and all my progress in the game are gone !!!! It’s not a pleasure anymore to play a game in this conditions.
Hi all Just highlighting each time I launch creators club it crashes. Report sent. This doesn't look to helpful below TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping user32 user32 TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping kernel32 ntdll
Platform: PC When: Clicking on the Creators Club. Crash report: LoginId:d21a12e34db34e1fb959bbb279b0fd67 EpicAccountId: LowLevelFatalError [File:Unknown] [Line: 1308] Failed to find function SetSelected in TileButton_C /Engine/Transient.GameEngine_2147482621:TS2GameInstance_BP_C_2147482614.WorkshopMenuWidget_C_2147472888.WidgetTree.WorkshopNavPanelWidget.WidgetTree.HubButton TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping user32 user32 TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping TS2Prototype_Win64_Shipping kernel32 ntdll
What platform are you on: xbox Route/loco: London commuter class 387/2GX Service/scenario: rerouted Location of crash (please be as specific as possible) if you are late to the first station the train does on the far left does not go