PlayStation Red Signal After Ebbsfleet Int

Discussion in 'TSW Troubleshooting & Issues Discussion' started by Gianluca, Sep 24, 2022.

  1. Gianluca

    Gianluca Well-Known Member

    Joined:
    Feb 25, 2022
    Messages:
    897
    Likes Received:
    636
    In service from Ashford to St.Pancras at 06:13 whit 395 javelin, after leave ebbsfleet int platform 2 coming to red signal (AF 124) but no train signed to pass in map
     

    Attached Files:

  2. CowBoyWolf

    CowBoyWolf Well-Known Member

    Joined:
    Sep 13, 2020
    Messages:
    2,457
    Likes Received:
    1,685
    How does the TVM look?
     
  3. Gianluca

    Gianluca Well-Known Member

    Joined:
    Feb 25, 2022
    Messages:
    897
    Likes Received:
    636
    What is it? I don't activate safety sistem
     
  4. CowBoyWolf

    CowBoyWolf Well-Known Member

    Joined:
    Sep 13, 2020
    Messages:
    2,457
    Likes Received:
    1,685
    its the thing that allows you to drive along the HS1 with the 395 the thing that tells you the speed and if you need to slow down
     
  5. Gianluca

    Gianluca Well-Known Member

    Joined:
    Feb 25, 2022
    Messages:
    897
    Likes Received:
    636
    Its positioned at zero ( the display notice 000)
     
  6. aeronautic237

    aeronautic237 Well-Known Member

    Joined:
    Sep 1, 2022
    Messages:
    3,389
    Likes Received:
    3,293
    Have you tried contacting the signaller (Hold "circle" button I think)?
     
  7. Gianluca

    Gianluca Well-Known Member

    Joined:
    Feb 25, 2022
    Messages:
    897
    Likes Received:
    636
    Yes and is denied
     
  8. aeronautic237

    aeronautic237 Well-Known Member

    Joined:
    Sep 1, 2022
    Messages:
    3,389
    Likes Received:
    3,293
    Did it say why? If it says "wait for signal to change" then you probably should wait. If it says "Your train appears to be off path" then something has gone wrong.
     
  9. Gianluca

    Gianluca Well-Known Member

    Joined:
    Feb 25, 2022
    Messages:
    897
    Likes Received:
    636
    It says "wait for signal to change" but i have waited too long and contacting signaller, timetable are delay for Stratford int. I've reported that again in the module of DTG dedicated at red signals, hope Dovetail to fix
     
  10. aeronautic237

    aeronautic237 Well-Known Member

    Joined:
    Sep 1, 2022
    Messages:
    3,389
    Likes Received:
    3,293
    If you waited too long then it probably is an issue. I too hope DTG can fix it.
     
  11. Gianluca

    Gianluca Well-Known Member

    Joined:
    Feb 25, 2022
    Messages:
    897
    Likes Received:
    636
    Bug fixed whit updated, thanks DTG
     
    • Like Like x 1

Share This Page