Inaccessible simply can not be done well, it is in any case an emergency brake!!:-( If the speed you are driving is even an emergency brake
I've been able to use the PZB just fine, but I'm using a keyboard anyway. Once you start moving have you pressed PZB Frei in the cab? There is no controller binding for that. After you are out of the monitoring you can accelerate past the 45kmh
There should be a set of buttons on the right side of the BR 143's console that have the PZB buttons. Make sure you release the PZB by using "PZB Frei" as another user has said otherwise the brakes will come on at 45 km/h.
Ehhh this BR 143 pzb is annoying You just can not do it well If I'm going 40km / h over the LOVE magnet, it's still an emergency brake here is no happy ending Everything is an emergency brake
Do you acknowledge going over the magnet? If you get to a Signal with an active 1000HZ magnet you need to acknowledge it once you go over it and you then have a certain amount of time to slow down to 70km/h. Same with Speed boards and so on. I have used the BR143 and PZB without bigger problems so far.
I came up with the trouble that the xbox controller can not acknowledge the pzb alarm you can not acknowledge the pzb signal with the B key
That bug is known since the first PC version of RSN.. https://forums.dovetailgames.com/threads/rsn-rb91-siegen-hbf-hagen-hbf-bugged.13271/
Actual pzb acknowledgment button works What I do not understand is the BR143 pzb system why it should always slow down below 40km / h, otherwise it is an emergency brake?!!
Yea, the button in the loco works, but not the one on the controller. And you have only around 2 seconds time to acknowledge when you drive over a active magnet. It also does not acknowledge if you pressed it before you hit the magnet.