PC Wcmls Enhancement Pack | Update 10 Now Available

A few weeks. They are next on the list after all the LU stock I'm currently working through though.

 

Hi JetWash , all these services were run using the 4-car 710 with TPWS/AWS and Vigilance/DSD on, Oct 25th/dynamic weather/clear
2D50 - 05:36 - ok
2D50 - 05:38 - ok
2D51 - 05:58 - ok
2D52 - 06:13 - ok
2D55 - 06:56 - ok
2D58 - 07:43 - ok
2D59 - 07:56 - ok
2D60 - 08:13 - ok - was showing as a completed timetable run so maybe I quoted wrong service before as crashing, my apologises for that
2D63 - 08:56 - ok
2D92 - 16:12 - ok
2D95 - 16:55 - crashes at aws ramp just before South Hampstead
2D98 - 17:42 - crashes at aws ramp just before South Hampstead
2D99 - 17:55 - crashes at aws ramp just before South Hampstead
2D50 - 18:12 - crashes at aws ramp just before South Hampstead
2D51 - 18:25 - crashes at aws ramp just before South Hampstead —- (5-car)
2D53 - 18:58 - crashes at aws ramp just before South Hampstead
2D56 - 19:43 - crashes at aws ramp just before South Hampstead
2D57 - 19:58 - crashes at aws ramp just before South Hampstead
2D58 - 20:13 - crashes at aws ramp just before South Hampstead
2D61 - 20:58 - crashes at aws ramp just before South Hampstead
2D69 - 22:55 - crashes at aws ramp just before South Hampstead
2D72 - 23:43 - ok
2D73 - 23:56 - ok

I thought at first it might be that when its dark that these services crashed, but the early morning services in darkness were ok it seems
(Probably not mod related, but the 710 can be driven without keying-in)

 

Realistically, DTG will likely never add mod support to consoles, it would be a nightmare for their support team to deal with on top of everything else. If you really want mods, you're ready to move to PC gaming.

 

As far as the 710 evening up runs crashing at that AWS magnet, I seem to recall this happening prior to the mod coming out.

 

I did wonder, though couldnt recall having any crashes prior to the EP, but I may have only run a 710 service that didnt crash.

 

Evening. An update to the EP has gone out now with the following changes;

• Adjusted sound cues so station announcements now play correctly
• Removed numerous dioramas and fixed one so that it now animates better
• Fixed some graffiti that wasn’t displaying correctly and added a fair bit extra, particularly around the southern end of the route
• Added real world billboard to the generic one that was missed at Bletchley
• Added extra clutter to the northbound DC line platform at Wembley Central as the scenery was very bare and added foliage and trees to a very bare area in a car park about 200m past the station
• Added some more variety to the posters/billboards to prevent duplication
• 377/7 - additional new interior decals and swapped to full destination names for PIS

 

We don't know exactly when freight is going to be implemented as we're waiting for the new Cargo Line pack from Skyhook to be released first.

It will probably not be for a while.

 

Can you remove entirely the announcement mod (not just the pak) then DL the latest version and try again. That’s the only thing it can be

 

Couldn't the timetable be created and then the formations be swapped out afterwards?

 

All in good time

Sharon E and everyone really - Fawx implemented the workaround idea to the TT for the 710 services that are jamming up and initial testing suggests it works.

 

I already had removed all the anouncer mod’s files, but I’ll check again and dl the update too.

 

Just to double double check, you removed everything, not just the pak file?

I did and have the latest version and can’t recreate the crash. Some of the others have had similar crashes to you

 

Love this mod and all I've done is stood at Watford Junction watching trains.

 

Yeah, fairly certain I did a side by side removal of all the files the announcer mod contains, but I’ll check it all through again later to make sure.

 

I do not have any announcement mod installed and will run one of these 710 services now to check.

 

Thanks, and thanks for the detailed breakdown. The fact that it’s crashing where it is suggests it’s only one thing causing it, but it’s weird it isn’t happening on every service. It’s frustrating also that I can’t recreate the crash

 

Just ran 2D98 and it crashes at the AWS magnet just before the platform, the one for the signal at the other end of that platform. As I noted above, I really think it was doing this before your mod.

 

Yeah very odd bug, there must be something about the crashing services that differs from the rest, but it seems to be that aws ramp that triggers it, I havent tried any of those services with the tcws/aws turned OFF to see if it still crashes

 

JetWash, I just did a search of my posts and this issue does predate your mod. I tested it back in September and confirmed it happening at the same location it is happening now.

 

Sharon E zappatime

Can I ask one last thing. Could you try removing all mods other than the ones for this EP, the ones recommended for this EP and GodMode (the ini’s are fine) and see if it still happens. I suspect it might be another mod causing it, it’s the only explanation for why I can’t recreate it.

 

OK, will do

 

That's not really worth it as Fawx will just have to do all the work regardless.

 

JetWash, it is not mod related I, after much checking removed everything but what is related to DTG and your mod and the service still crashes at that location. Just to make you sure, here is a screen grab of my dlc folder.

 

Why is your TT named like that? I’m assuming a duplicate download…

Also, have you done a file verify in steam. Even though my game is working I just did one and got a 330mb download. It’s possible something is corrupted.

 

JetWash, did the file verification and it did dl a 30k file. When I ran the service I have been using for the test, it still crashed at the same spot.

 

Understood. Why’s your TT got that name, any idea?

 

JetWash, really don't have any idea on why it is showing as a backup. It may have happened when I moved things into that Mod Hold folder earlier.

 

That 30k file is probably the game’s default ‘pie dll’ that CobraOne’s interface replaces, which I think you said you use.

 

Anyone else have an issue with a ground signal coming out of Wembley InterCity Depot? It shows a clear aspect (two white lights) but trips the TPWS, also it appears to be the only signal in the area without an identification number.

I tried it on a couple of different TT's with no change in behaviour but the images below relate to 5G26

It starts off at danger, but when you approach the semaphore signal and it clears the ground signal clears as well (according to the map). Once you've triggered it, reset the TPWS and then moved clear of the GS and grid only then it reverts back to Danger (two red lights).

 

Appreciate the heads up, but this is the wrong thread. As the modders have said repeatedly, they did not touch the signals, and all signaling issues derive from DTG's base route.

 

First time today with WCML EP What an incredible job you have all done. The route is transformed not only by the attention to detail that has been lavished on the scenery, but also the work and planning of the Timetable. No matter what time of day the service runs everything looks stunning.

I had a couple of issues with one of the 710 morning services with 5 cars. The unit spawned, then jumped forward 4 or 5 meters. Sorry I will try to replicate event again to provide the service code, but it will not be until Tuesday. The other issue with the same service was that there were no passengers at the stations. I thought that I had seen something about editing the .ini file passenger settings but I cannot find the post.

 

Hmm fair enough, sure I'd done a run through there before the EP and I didn't get EBA'd, maybe I'd forgotten to turn TPWS on that time, idk.

 

Yeah any signal/aws/tpws issues are base route. Not something we can change. I'd post them in the route feedback, or support ticket them.

 

Sharon E
I always delete the copy parts of a mod name in the dlc directory (namemod (*).pak so remove (*) plus the space before the (
so just make sure to keep it as they are on the mod site

 

Hello i'm new here any tips you can give me on the forums ?

 

Just for reference and to save anyone else reporting it here, the "fix" is to just not enable TPWS until you've passed this ground signal, I tried the temporary isolation but that didn't seem to work for me.

 

I spent a few hours yesterday morning chilling out watching the comings and goings at Harrow & Wealdstone and Watford, with the timetable using real life 2024 timings, I thought I'd add a bit more realism by having the web page below opened, synced the game to real time.

https://railannouncements.co.uk/amey-live-train-announcements/

Most of it was spot on, obviously delays/cancellations and being a Saturday service in real life meant it didn't match 100% and platforms were slightly different at Euston but it didn't half add to the immersion, especially the auto announcer mod when travelling on the 710.

DTG really need to look at having both auto announcements onboard trains and at stations for core addition for TSW6

 

Those who have encountered the endless "disembarking passengers" at Euston - just wait. Approximately +2 minutes from the scheduled arrival time. Then close the doors.

 

I am going back to the series of posts related to the issue with the 710s crashing just prior to arriving at the first stop after leaving Euston when you cross the AWS magnet just before leaving the tunnel and getting to the platform. I went back just now and ran it with safety systems off. It still gives that UE crash. Course found out that the 710 will not start if TPWS is isolated, so have to get it running then cut it off. This issue is definitely related to the base route and has nothing to do with these mods. What is interesting about then is, they are time related, early in the evening, and seemingly not related to having safety systems on or off, even though the trigger point seems to be that AWS magnet. These have been reported in the problem thread for WCML early in its release.

 

Can someone please point me in the right direction for the .ini edit for passengers. I was sure it was on this thread but I cannot find it. I thought that it was a Jetwash post/response.

 

PC - Passengers Parameters In Engine.in | Dovetail Games Forums

there you go all kinds of parameters for passengers
did search for it on google with the the following text tsw engine.ini passengers

 

I was sure that Jetwash had made a post detailing the settings and the ini command that they worked with. prehaps when he comes back on line he maybe able to help.

 

They’re in my ini EP, plus detailed on the DL page for this mod (with a MASSIVE caveat)

 

Are you referring to TSC DL page?

 

Yes

 

Jetwash, I am really trying hard not to be a pain, but I have searched several times by your uploaded Mods on TSC and cannot see your ini EP.

 

Here you go;

https://www.trainsimcommunity.com/m...tsw-5-lighting-visual-quality-enhancement-v11

 

Thanks I have got that pack but I cannot find any reference to Passenger ini settings. That was the manual that I complimented you on a couple of weeks ago.

 

Look on the route specific ini, bottom two lines

 

Now I'm confused- what do passengers have to do with TSC?