Tom’s Creators Club Thread

That's unfortunate to hear, the only solution I can think of is to make the formation slightly shorter and that should resolve the crashing, do report back if it doesn't work .

 

It may also be an issue if you have multiple custom liveries in the formation too.

 

I Don’t.

I’ll do that.

but now i have to redo the entire scenario because i deleted it and forgot to copy it before

 

Also, wow 2nd page already..

 

Yeah, really good to see isn't it?

Oh dear... top tip, always save your scenarios after the creation process and if you make any changes, make sure it saves those changes to prevent this issue from re-occurring .

 

Yea, i thought about changing the AI at Aachen because it was only 3 trains (including player) at Aachen, changed the platform to 8 and added 2 ICE Trains that one follows you. Also the special doesn’t call at Stolberg HBF, but i need to make sure i remember to add Köln-Ehrenfeld.
Also I shortened the train to 10 instead of 14 (+ 463.0)

 

Have a (attempted, i’m not good a poetry) poem. This gives a hint for the sequel of Footy Tap.

“After the intense match, it’s time to head home,
But it goes wrong when the tap changer’s stolen by some.
So a quick solution makes some people pale,
As the consist has to become loco back and front.

 

Ah fair enough .

 

Hi guys. Tom here, and i have some bad news regarding Footy Tap.

I’m cancelling the scenario. Why? Well, it crashes when i try and upload it. I’ve shortened the formations and a bunch of other stuff, but it doesn’t work..
I’m sorry for everyone that was hyped for the scenario.

 

Oh well , it is really hard when you have to cancel a project but I reckon that your next project will be as good as Footy Tap would've been .

 

Hopefully Yes!

 

New 465 Livery out!

 

Hey all! Tom here, to announce my next scenario and the 1st installement of ‘Great Western Shifts’ called ‘High Speed Stopper

Name: (GWS 1) High Speed Stopper
Route: Great Western Express
Stock: HST (2+4 set)
Route Coverage: London Paddington to Reading
Length: 1 hour
Context: The 166, which you were originally allocated to for the 8:35 Great Western Railway service to Bristol Parkway, has failed with engine problems. To not cancel the train, a 2+4 HST set was put on for the service. Take the set from Paddington to Reading, where another will take over

Here’s some preview pictures:


Paddington is quite busy. A HST 2+8 set leaves for Swansea, a 166 waits to leave for Newbury, 45586 ‘Hardy’ waits to leave on a railtour bound for Cardiff via Newbury and our player service leaves for Bristol Parkway

We pass Acton where a RHTT Train sits in the reception line. It looks like we are chasing the HST
We leave Hayes and Harlington and pass by the aggregates facility


As we approach Iver, we pass by a 66 on a Loaded HKA Train.

Formations you need:
(GWE) 165 (TTB)
Routes needed:
Great Western Express
Spirit of Steam
RHTT

Spoiler: GWS Related

You will be able to drive a railtour into Paddington in either GWS5 or GWS6

 

So you have started making your first Scenario Pack, looking forward to seeing the rest of the series as well .

Got two Scenario Packs myself coming out in October from Blackpool and Glossop so nice to see you branching out into other avenues rather than just singular liveries and scenarios.

 

Because i feel like it, guess what loco will haul the railtour in GWS4



(you probably already know it)

 

Lemme guess... A3? Could it be... the Scotsman that flies?

 

*ding*

 

Currently Testing GWS3, GWS2 is already done, just gonna announce it with the former.

 

The GWS scenarios will have less Ai, this is to hopefully stop it from crashing

 

No worries, as long as the scenario is playable, it should be fine .

 

Hey all. It’s time to announce GWS2 and GWS3.
Starting off with GWS2: Commuter Express

Name: (GWS 2) Commuter Express
Route: Great Western Express
Stock: 166
Route Coverage: Paddington - Slough
Length: 30-40 minutes
Context: Your driving a semifast service to Slough in a 166, but instead of the slow lines, your on the high speed lines! You will be calling at Ealing Broadway, Southall and Hayes and Harlington

Here’s the preview pictures:


Here we are, passing a London-bound 166202 as we speed down the Great Western Main Line, on the UF
This is one of my favourite photos i’ve taken.
a DB Schenker 66 passes us at Southall from the yard with a container service for Acton.

Now here’s GWS3:
Name: (GWS 3) Rail Head Reading
Route: Great Western Express
Stock: 66 (x8 Tank)
Route Coverage: Southall Yard to Reading via London Paddington
Length: 50-55 minutes
Context: It’s a early October morning, and you have been called out to start on the first leg of 3S77 Southall West Yard to Southall West Yard via Paddington, Swindon and Westbury. Start the first leg by heading to Paddington, then switching to the other 66 and head to Reading, where another driver will take over.

Preview Pictures:

This is a photo that belongs in the Screenshot Contest. A 66241 and 66051 leave Paddington on the way to Reading.


At a very quiet Paddington, we switch to 66241 and head out of London.

Spoiler: You might have to do this

Keep the reverser handle and brakes released in the 66 you take from Southall to Paddington. Also (if on PC) switch cabs to the (then back) 66 to apply the Automatic Brake, if your on console without keyboard. go in the secondman seat and scroll through the cab views untill you get the cab of the 66 from your Southall to London section and apply brakes there

 

Looking forward to seeing these release, really interesting ideas as well . Wouldn't have thought of those myself .

 

hey mate, would it possible for a scenario that utilises the WCL Jubilee (red) and its coaches on peak forest railway? from buxton to amberley (i think the one in the bottom right). I dont mind the specifics. maybe in july? thanks. PS do you have a link or a way to find all you CC work?

 

maybe based in modern times and used like a railtour please? thanks

 

Issue with that:
You can only use Buxton Midland. That closed in 1967, and the LNWR station’s out of bounds.
I could do it from Matlock or Chinley.

and i couldn’t do it modern because i said

I could do it in the 80s like 5593 is doing a railtour from the 80s as it was mainline certified

 

Commuter Express is out!

Link: https://creatorsclub.dovetailgames.com/creations/180138​

 

Long time no see but how's development going of the scenario pack? Nice to see you return .

 

It’s going alright, Rail Head Reading is coming out either tommorow or Sunday. While I will work on GWS4

 

Error on the Release description, you go to Slough, not Hayes

 

That's good to hear this project is still going strong .

 

Rail Head Reading is out!!
Link: https://creatorsclub.dovetailgames.com/creations/180585

 

Planning on making some liveries. You’ll see them soon.

 

I’ve decided to rise this thread from the dead to announce something,
I (inspired by TrainGeek08) am making a railfan scenario.
Here are some hints:
-It has Turbostars stop here
-it has 4 platforms
- It is served by 2 operators
- Loads of freight pass through to get to Mountsorrel

 

I'll guess Leicester .

 

I think Mountsorrel gave it away..
It is Leicester!

 

I think so... I mean I could've guessed Derby or Nottingham based on the first three clues, but Mountsorrel gave it away to be Leicester .

 

I’m back again! Leicester (Railfan) is still in the works, Although I may restart work on FlixTRAXX, but who knows?
Maybe a WCL Scenario could come out before any of the two

 

Hey all! It’s been a while. Sorry around the lack of uploads and updates, it’s just that my motivation for creating content has basically fallen off the charts.
Hopefully I will plan on doing a Rail200 Scenario (might use rigsby#3981 ’s 43803 for it but we will have to see) on Midland Mainline.
Thanks for waiting and I hope to say more about in the coming weeks or months!

-Tom (TTB)

 

Hello and Welcome to my first upload in a couple of months! A (Fictional) Livery, Network SouthEast on the DB 463.0 Karlsruhr Kopf Cabcar!​

Name: NSE 463.0
Stock: BRO DB 463.0
Time Taken: 45 minutes

Screenshot Time!

Here is the livery at Williton Engine Shed, the location for photos of loco / individual wagons liveries. Multiple Units will be screenshotted at either Williton or Bishops Lydeard.


Never knew the corridor looks like that


Here it is passing over the Oldenburg Bridge. Very unusual for NSE liveried stock to go along.

I hope you will enjoy this livery when it releases!

Link: https://creatorsclub.dovetailgames.com/creations/212673

I’m TTB, and I’ll see you in the next announcement

 

That’s weird, I was gonna announce my next livery, but it appears that photo became pixelated
Don’t worry I’ll fix it

 

Ok, I’ve sorted out the pixelated issue.
Anyway here is a 56-Style 47 for Blackpool Branches!
Name: 56-Style 47
Stock: PBO 47/4
Time taken: 25 Minutes

Screenshot Time!

Here is the 47 56, this is 56001.

Close Up on the (mild) weathering, number and other details

And here is 56001 At Burn Naze with a Stanlow Bound Oil Train. You can see the weathering in the picture
Link: https://creatorsclub.dovetailgames.com/creations/213194
I hope you enjoy this livery!

 

This looks great so far. Quite highly detailed.

 

Thanks! I always try my hardest (I have been requested by a mate to make a AWC Pacer, but he isn’t on the forums)

 

So the List of planned liveries are:
Railfreight Grey (Red Stripe) 87
Intercity (Executive) Class 66
NSE N-Wagen
NSE 87/66
Avanti Pacer
Thomas (the tank engine) Liveried Locos (Unknown what loco though)

 

I'm very interested in seeing the Intercity Executive 66

 

I subbed to this a few mins ago so I may test it out and give you feedback if you like
Take care,
JPlayz

 

Oh yes please, I’ve never gotten feedback surprisingly lol
I will!
Tom

 

How would you guys feel if I created a Model Train Collection of Liveries?
(Picture Related, Livery still wip)

 

Now this I would love to see It looks great so far. Can't wait to try it out

 

Lol.