PC Ts World Raildriver And Joystick Interface

Can you download V2.0.1.5 from the following link, extract the exe file and copy it into your current program folder replacing the V2.0.1.4 exe. Your joystick should then work correctly.
I have adjusted the code so that moving the lever up to half way in each direction will send one key press, and you have to return the lever to the center position before you can send another key stroke.
Moving the lever further towards it's max, will send the keystrokes continually as if you are holding the key down. This only works on X, Y, Z, Rx, Ry and Rz axis.

Here is the link:
https://www.dropbox.com/scl/fi/udch...ey=7z3fa01yyihaw17c0owixdba9&st=6qerngrs&dl=1

Let me know how you get on and if it works OK for you I will announce the release officially.
Chris

 

Thanks so much Chris.

I’ll give it a go tomorrow (work gets in the way as usual) and report back.

ps. Think I’m still on 2.0.1.3. Do I need to go via 2.0.1.4 first?

 

No, you should be OK to go straight to v2.0.1.5

 

Hi Chris,

Just had a quick test before going back to work and it now works but not quite as you described. Moving the joystick slightly forward or backwards gives continuous inputs, but once the axis moves past half either up or down it stops the inputs completely and you have to recenter it again.

Thanks again

Neil

 

That is odd. I have just tried the software with three different flight sticks and a joypad and they all worked as ! described.
Have you got the T.A.R.G.E.T software running in the background?
If so, try closing it and see if that makes a difference.