Right ok did you try the pantograph reset? will get it logged, a video would be helpful as well if possible showing it not doing it
When you move the power controller to off it'll dump all power and you have to wait for it to run down before you can reapply. The first black vertical gauge shows what tap you're in. The end of the video shows you reapplying power but you're only applying a very small amount, if you hold the trigger rather than tap it it should allow you to gradually apply more until you are happy with the amount. I'd recommend the tutorial and reading the manual which should explain this in better detail. downloads.justtrains.net/products/JTF003001/WCML_Preston_Carlisle_TSW5_manual.pdf?fbclid=IwY2xjawGy1O9leHRuA2FlbQIxMAABHR4VPyTNS0srmTuR8vJR8D6_14aYi-GEoBqlkFcwwOlrcarRz0-Mr5sBrg_aem_hV91Ifh0aSY0VUMAbLUTZQ
JT Benedict I think There is a bug thats been introduced from an update. I go through the neutral section totally run down, lights go out but do not come back on. On one run I managed to free wheel to next neutral section and the lights came on going over the neutral section then went out once I'd passed over it. I've noticed the pantograph is down but will not raise. I reset the physics but this disconnects all cars except the parcel car and it will not let me couple back up to it. 1M16 neutral section at Shap 1S26 neutral section at Lancaster
