PC Tsw 6 Enhancement | Lighting & Graphic Ep V6.1

Yes the link was wrong - the full mod has a bat file for you to create your own Pak

 

He is asking what you need to edit and how.... Not where you can find the mod

 

Sorry .batch file is not what the download is.... TSW are .pak files

 

Yes sorry still wrong, trying to find this on my phone. Can you try this one

https://discord.com/channels/373055767642898433/373057621306900491/1424484481993150617

 

What should i change here?
C:\TSWMods\TrainSimWorld5Mod\Engine\Binaries\Win64\UnrealPak.exe


1. Extract contents of this .zip file to a folder

1. Put the latest god mode .pak file in the PutGodModeHere folder

2. Open UnrealPakLocation.ini and change the location to wherever UnrealPak.exe is

3. Start Run.bat

4. Put the newly created GodMode_TSW6_Temporary_Addon.pak in the TSW 6 DLC folder

 

I've sent you a private message with a link to the the .pak file that I am using. Maybe that's easier. If you can check it works then I'll post the link here.

 

Not sure if DTG allow links to be posted here but here is a link to my OneDrive with a pak file to enable god mode for Stara Paka. Use it at your own risk. In case the link is removed you can Private message me and I'll send it to you. I'll remove it myself if god mode gets updated.

Removed Link. Now out of date. See updated version a few posts below including the new NEC route.

 

Thanks a lot, will try. (I was said that links are okay.)

//EDIT: Works well, thank you!

 

Tigert 1968
Great Works very good
Thanks a lot for this

 

All right, it's first-world problem time. Now that I have replaced the Potato with Godzookie (Godzilla's smaller sidekick), I have a couple of issues that didn't trouble me before:

Flickering shadows, on the train and in the cab (not static shadows). I assume that this is a refresh rate issue causing a strobe, but can't figure it out. I assume some combination of game and monitor RR combined with turning G-Sync either on or off will fix it, but I can't get it sorted.

Also, moire patterns in fences. Not remotely as bad as it used to be, but I'd like to eliminate completely.

 

Which routes with the shadows?

The only thing that will sort the fences is DTG adopting new AA methodology (DLAA). There’s literally nothing more can be done about it other than upping your screen percentage. I’ve tried absolutely everything I can

 

Hi.

If you are using DX12, you will suffer a lot of shadow flickering, although this brings bout a lot less micro stuttering.

I've reverted back to DX11

 

Hi, is there an updated version of God Mode for the route released yesterday NEC?

 

I'm working on it with Tigert1966
Wait until later today for more information

 

New version of Temporary Godmode:
Stamford route added
https://gofile.io/d/xXsOfT

Thanks to Tigert1966 to learn me what to do to get it work

 

Sorry for the stupid question, but do they need to be added manually based on your hardware's capabilities? Or are these lines no longer necessary?

 

Are the Medway Valley settings added via the godmode tab? If so, would someone please explain how?

 

Yes, but GodMode will need updating first

Those settings are for ‘beast’, so will need adapting to your machine as normal

 

Thanks, when I update to the new version will it port and save previous settings?

 

JUst wondering, JW? do you recommend turning VSync on or off? And do you suggest capping frame rate?

 

I or Tigert1966 will do our best to create a temporary file for the godmode again when its not updated by Foobian

 

Here you go - Download and place in your mods folder along with GodMode 6.6.

GodMode_TSW6_Temporary_Addon.pak

 

Very good thanks!

 

Thanks gang

 

I have now updated my Lighting Enhancement engine.ini mod to include all TSW6 routes except (I believe) Heilbronn which I don't own.

This version of the mod has not been tested so I can't account for typos etc but it should absolutely be compatible with all routes, including Medway Valley, stopping any ini related crashes people have been having. You must update both the main engine.ini and GodMode save as explained in the accompanying manual.

Should there be an error in the mod I'm happy to correct it but I’d like to clarify, should people still wish to use their own ini setups, or ones made by others and still encounter crashes at any point with TSW6 then that is obviously your own choice. I will not be providing any more support in these circumstances for those suffering crashes related to engine.ini modifications.

The updated mod can be found here:

TSW 6 | Lighting & Visual Quality Enhancement vTSW6.1 - Train Sim Community

Enjoy

 

Works great for me, thanks very much JetWash for finding time to do this, much appreciated.

 

Very cool! Thank you so much. This will make the Medway Valley even better. What a super nice route is that

 

Thank you Jetwash for this update. The manual still describes the old configuration:

r.Streaming.PoolSize=
r.Streaming.MaxTempMemoryAllowed=

That's no longer necessary, right?

 

Oh balls. Yes, you are absolutely correct, those are some of the lines that have been causing crashes for me in TSW6.

I’ve updated the download page, thanks for spotting that.

 

Updated my engine.ini to your latest, nothing else custom in there. Updated the GodeMode save file and GodMode pak file, still getting crashes.

 

IGNORE THIS! I went back and took another look at my Engine file and I somehow messed up the copy because I still had the streaming lines in there. My mistake but I’m glad it was. Fixed now, and checked, will try again tomorrow.

 

I’m almost certain that the lines that I have removed that relate to memory streaming, garbage collection and a host of others are to blame for the crashes. This started happening for me the minute TSW6 was released and I’d long since removed them. Once I did that my game has been rock solid since across all DLC.

It is imperative you copy across the text in it’s entirety and overwrite what is already there making sure you save it when you have done so.

 

Thanks for the update, JetWash!
Does that mean we can now enjoy all your optimisations to the routes as before AND enjoy the new MVL without the need of changing anything?

 

Well, you need to update my mod to the latest version as described above. I can only guarantee what my mod does, and using ini settings from elsewhere is likely to cause unpredictable results.

 

I have loved this Mod for years and now I have the perfect route to go with it. I extend my gratitude to you and the whole team at Firefly for all you have done!

 

Are there any ini-lines to make shadows less contrast(lighter) especially in the morning/evening hours without changing the brightness of the game? Maybe there is a command that changes the color of the shadows to make them lighter? Or a command that disables shadow multiplication when they overlap?

 

I thought DTG gives keys to all DLCs to its developers.

 

I have a problem. The ballast is loading right in front of the train. Is there a way to fix this, or is it some other mod interfering with it? I launch the game without this mod, but it doesn't help. This problem is especially noticeable in bright sunlight.

 

The track on MVL is the same track as on every other route in the game for what it’s worth.

 

I wouldn't say it's a MVL issue, it's just that I've started playing it now, and because of the high number of sunny days, it's really noticeable. I don't use ballast mods. Maybe there is a way.Maybe there is some parameter that can help?

 

Your most recent mod versions "godmode.sav" file breaks the Zoomier Zoom in Foobians mod. I've tried the "godmode.sav" file from both the beast and ultra folders and while the Foobian interface loads the only way I can get the Zoomier Zoom to work is to remove your godmode.sav.

 

We’re looking into it for MVL because what we see in the editor and what some (not all, not me anyway) people are seeing in the game is not the same thing. Will keep you posted.

 

I'm pleased to report that removing those lines has finally cured the annoying crash on Birmingham-Crewe that I last mentioned a couple of weeks ago.

Incidentally, I'd cured the crashes in your previous version by adding in a line from the SEHS settings that wasn't in the Birmingham to Crewe ones, namely r.Shadow.CSM.MaxCascades=4 - out of interest, any reason why that line is in some routes but not others?

Anyway, I can now finally enjoy Birmingham to Crewe with your mod, at 1440p and a decent framerate, and no crashes. Huzzah!

 

Honestly, I’m not sure. Keeping track of this stuff is getting increasingly difficult to be honest.

FWIW Birmingham to Crewe and Riviera were routes that were crashing for me with those lines in the ini. The core is constantly changing and they are no longer robustly safe to use in a mod. I also believe they are no longer necessary as the game is much smoother now than it was 18 months ago.

 

That would be great. Other routes suffer from this too, but not always.
P.S. Thank you very much for updating the mod. Liberec - Stara Paka has become much better. FPS is much more stable.

 

Thanks, and thanks again for updating your mod; couldn't be without it!

 

Happens to me too.

 

Query about Lossless Scaling:

On my old machine, this magic utility was the only thing that made it possible to run TSW 4+ at all. But now things are a bit different- with a 180 Hz monitor, even in Mode 3 I'd still be driving TSW at 60 fps, which really seems to defeat the purpose of the exercise. Have I outgrown it now?

(Ryzen 7 9800X3D, RTX 5070, 32 GB RAM, 12 GB VRAM)

 

Do you by any chance have an AMD graphics card?

 

Yeah I have a amd GPU with this problem... Is there an option to fix this? I have seen this on different add-ons.