Hi everyone sorry for the late Hour but I need to know why the spacing varies when installing multiple Rails given that they should all be the same.
Do you mean like building a Yard or something else? The rails don't automatically line up unless you use the Offset Tool
This my Problem of Rails Regarding the visible white lines the first two look fine, but the third one looks bad it's out of alignment with the others. when I stretch the curve so it joins the others Boom the problem that one of the three doesn't fit. Do you know what is causing that problem?
Does the same happen when you do a shallower curve? I've never seen this issue before and I think it could be caused by a tight bend. If not, try a different track rule, if possible.
In the last screenshot you can see the middle track doesn't connect (which they should), the red squares indicate the track is not joined and you can see it if you track the rail through the curve
You could but when you join the track it just moves that section to the other piece making it even more misaligned at the other end, when you are laying multiple track like that all arrows should just snap on the ends of the track which it looks like the outside ones have but not that middle one
Well, those Three Curves you see are the ones I want to Finish i need to Finish that in order to continue. The hardest part is the "Iron Triangle" which I've already Finished but I need to Finish that part.
This does seem to happen occasionally, usually when laying more than two tracks at a time. If I enoucnter this I just try a few different ways until it works. The first thing I would try in that screen shot would be to take out just the offending one, and relay it as a single track between the others and see if it connects. If not, try laying it in the other direction. Sometimes these things take a little while to get perfect but just keep experimenting with different ideas until all is as it should be. Good luck. John
