On the Liverpool Street to Braintree route with class 360 Numerous times the Emergency Brake is applied. for what I can see no apparent reason ie approaching Witham station at 30mph, bang on comes the brake No signals at red or Passed at RED Can the Emergency Brake be disabled ? Cant figure out how to get restarted after stopping either
Bures... I haven't got the 360 so can't speak from experience however, have you got the DSD activated??? You normally cancel it by releasing/depressing a treadle on the floor, but I'd strongly suggest having a read of your 360 manual... Eric
There is nothing in the manual concerning DSD However, when I google "Train Sim2020 Class 360 disable DSD" an awful lot of people are asking the same question I am not the only one with this EB then alan
It is not a problem as such - like a real 360 the train has a Vigilance device which had to be reset after a set amount of time. Page 10 of the Manual says Driver vigilance alarm = Numpad Enter Just hit that if it goes off whilst you are driving Easy to test by running the Class 360 in Quick Drive to see if that is the sound you are getting Peter
