There is no parking brake to get the train moving right next to your chair there is a generator switch & you have to turn it on & you need to press the buttons 3 & 6 to cut in the brakes the buttons on the top on the right screen
I also changed Dead to Lead, and saved , is that also correct? Ive done that, set generator, control and fuel switched to On, released the brakes, but it doesn't move ,
Thats very odd you did everything right.I would say you need to contact the support team https://dovetailgames.kayako.com/
I am also have the same issues in getting the AC4400CW to move, and I am on PC. Added : So I gave another try and still nothing the loco will just not move, so I have submitted a ticket very frustrating cannot get it to move.
Did you try this from the manul? 9. The correct settings are: Feed Valve: 90psi (use F1/F2 on the IFD Keypad to adjust if needed) Auto Brake: Cut in (use F3 on the IFD Keypad to toggle if needed) Independent Brake: Lead (Use F4 on the IFD Keypad to toggle if needed) 10. If you made any changes, press F6 on the IFD Keypad to make those changes Active. 11. Press F8 on the IFD Keypad to exit the Air Brake Setup screen.
You can change controls to classic, or if you have a keyboard press zero and it will bring up the radial menu for cameras from the classic control layout even with immersion controls.
So I have gone buy the manual says to do, and have watched several videos that are posted to youtube and no matter what I cannot get move properly. After six attempts I did get it moving how ever that did not last long as I was never able to get the train up to speed, and died on a hill 8.9 miles before Mance.