Xbox Sand Patch Y104

GP38-2 loads up with brakes on and 20psi in cylinder, unable to take brakes off. Same happens on Y103 but restarting task clears it.

 

Ah, MU-2A valve

 

Set the MU-2A valve from "Trail 24/26" to "Lead or Dead".

 

Thanks so much for that, theres nothing about this in the tutorials and I've only driven UK locomotives. I spent 2 hours last night thinking it was broken

 

Wait until you go up the grade with 2 SD40-2's that can't go any faster than 13mph even with 2 GP38-2's tacked on the back with a stack train. It drops from 50mph to 13mph pretty quickly. And this is deep up the grade. You'd think the distance to destination thing is busted. But it's not.

 

Ok but how do you do that on an AC4400CW?

 

On your info display press the function for air brakes, then select Cut In and then Lead

 

Sorry but which buttons are those?

 

Either you can do the AC4400W introduction under Training Modules, or
once in engineers seat 'press left arrow button' which takes you to integrated Function Dispaly.
chosoe Air Brake '1' and then go from there. [To leave display use right arrow button]

 

Thanks for telling me