PlayStation Scenarion Planner (rsn): Wrong Endpoints? Npc-train Run Over Red Light

Route: RSN

Made a scenario with the BR 143 from Hagen to Finnentrop. Between Iserlohn Letmathe and Altena, the scenario ends because somebody run over a red light.



After some investigations, i found the "bad guy" who did this:


The npc train driver is not able to stop this old DB BR 155 with full loaded wagons befor the red light in
Plettenberg, while my train has never left Hagen Hbf:

 

Edit the title and the original 1. post because of new information about this strange bug.

 

Tested this scenario with
- DB BR 155 + mixed freight Bx20 (loaded)
- DB BR 155 + mixed freight Bx20 (unloaded)
- DB BR 185.2 + mixed freight Bx20 (loaded)
- DB BR 185.2 + Shimmns Wagon Ax20 (unloaded)
- DB BR 155 only (no wagons)
- 2 x Talent 2 DB red

NPC-Train start: Iserlohn Letmathe
NPC-Train end: Plettenberg track 809

All NPC-Trains run over the red light, so it could be a problem with
the track 809 at Plettenberg. (Signal position or npc-train end position)

 

I think the problem is, that the endpoints for train stop are set incorrectly.
The player had the chance to avoid running over a red signal, but the npc don't.

Start: Werdohl
End: Plettenberg track 809:
Endpoint 1m before signal - NPC train run over red light (game over)


Start: Ha Hohenlimburg
End: Ha Boele track 303 (wood yard):
Endpoint 750m before signal - long NPC trains are blocking the main track
(This endpoint is set for trains coming from Hagen Hbf)


Endpoint should be here:

 

Start: Plettenberg
End: Finnentrop track 6
Endpoint over 800m before next signal - long NPC trains are blocking the main track



Start: Plettenberg
End: Finnentrop track 2 (passenger platform)
Endpoint is more than 900m away from Finnentrop Station!




There are more tracks with wrong endpoints, causing NPC trains running over red lights or blocking the main track!

 

I had a similar experience by playing RSN with the Scenario Planer. For one: NPC trains did not move and remain at their starting position. On the other: at the passenger service from Hagen to Finnentrop I also noticed that the last stop for the platform in Finnentrop (which is shown correctly in the in the settings menu) is misplaced. I made a passenger service with a Talent 2 to Finnentrop and the train was forced to stop at the area of the freight yard and not at the platform.

 

Yep .... and if you set a long freight train to Finnentrop track 6 that reaches Finnentrop before you, it will block the main track and you can't even reach that wrong endpoint at track 2 with your passenger train.

 

And another two, that will end your game:

Start - Hagen freight yard
End - Hagen Boele track 304 (wood yard)



Start - Hagen Hohenlimburg
End - Hagen freight yard track 223