Wcml South 350/3 Issue

Discussion in 'Technical Reports' started by Hornby48, Sep 28, 2020.

  1. Hornby48

    Hornby48 New Member

    Joined:
    Apr 15, 2018
    Messages:
    7
    Likes Received:
    0
    Anyone else have issues driving the 350/3? I cannot cancel the DRA when it activates. Pressing Q dosen't work. Am I missing something?
    Mike
     
  2. 749006

    749006 Well-Known Member

    Joined:
    Dec 10, 2016
    Messages:
    8,499
    Likes Received:
    2,716
    The DRA is the Drivers Reminder Appliance
    It does not "Activate" - it is either On or Off and when On stops you from Taking Power

    Peter
     
    • Like Like x 1
  3. ARuscoe

    ARuscoe Well-Known Member

    Joined:
    Apr 9, 2018
    Messages:
    10,832
    Likes Received:
    10,483
    DRA is the red light/switch/button on the dash which the driver sets to "remind" them that there is an adverse aspect (ie not a green) that they need to take note of after making a station stop or setting off
    This is turned on and off with the Y key in the 350, but it can be other keys in other locos.
    As Peter says, when DRA is applied the unit won't take power until you turn DRA back off again (acknowledging that you know about the adverse signal or that it cleared in the meantime)

    What it's basically for is that you won't take off like a bat out of hell on a single yellow after stopping at a station
     
    • Like Like x 1
  4. Forzaboy4

    Forzaboy4 Member

    Joined:
    Jul 15, 2020
    Messages:
    40
    Likes Received:
    41
    I think you might mean the DSD, if so, try pressing the 'E' key
     
    • Helpful Helpful x 1
  5. Hornby48

    Hornby48 New Member

    Joined:
    Apr 15, 2018
    Messages:
    7
    Likes Received:
    0
    Thank you for your replies. It seems that the E key was the solution.
     
  6. Forzaboy4

    Forzaboy4 Member

    Joined:
    Jul 15, 2020
    Messages:
    40
    Likes Received:
    41
    No problem!
     
  7. esgtee

    esgtee Member

    Joined:
    Jul 20, 2020
    Messages:
    23
    Likes Received:
    34
    I wonder iif you can reset the DSD before it goes off? Might give that a go sometime, press the E key or move the power-brake controller. In the real 350 cab, moving the PBC a notch prevents the DSD alarm going off.

    Alternatively I've lifted my feet off the pedal for a split-second, and back down again so I don't have that damned alarm going off randomly!
     

Share This Page