Hi, I’m whizzing my way through the journey chapters on TSW2 Sand Patch. Next up is Journey 7 on chapter 3. It’s a coal run, it starts me in the cab of a AC4400CW, it doesn’t give me any setup instructions like most previous runs, I just release brakes and try to drive off, but I can’t shift the thing, all brakes are off, I checked the brakes in the 2nd loco, I released them too and it’s in neutral, but I still can’t get the front loco to shift, the field gen is off, so power increases, and eventually the wheels slip and the train shits itself. I must be doing something wrong. Any help? Thanks
Press the IFD1 button on the display, then press the F3 button to cut-in the brakes, F4 button sets the loco to lead and finally save with F6 button. Engine run, gen field and fuel pump on. Trail locos (if present) should be set to cut-out and trail via the display, do not forget to save with F6 button. Engine run, gen field and fuel pump off.