PlayStation S-bahn Br 1442 Not Starting On Ps4 In Scenario Editor

Discussion in 'TSW Troubleshooting & Issues Discussion' started by Vectron383, Jan 5, 2021.

  1. Vectron383

    Vectron383 Member

    Joined:
    May 21, 2020
    Messages:
    32
    Likes Received:
    34
    The cab is all set up to go and when I close the circuit breaker a loud hum starts, but the unit will not move. It also shows power as being applied too
     
  2. Fitz

    Fitz Well-Known Member

    Joined:
    Jun 4, 2019
    Messages:
    754
    Likes Received:
    702
    Is the independent brake off.
    As you sure you held down the battery switch for 5 seconds on the right rear wall of the cab before closing the CB and raising the panto.
     
  3. Zammy Martínez

    Zammy Martínez Active Member

    Joined:
    Jul 26, 2018
    Messages:
    291
    Likes Received:
    175
    Im having a similar issue but it’s different due to the scenario..
    Silly
     
  4. Vectron383

    Vectron383 Member

    Joined:
    May 21, 2020
    Messages:
    32
    Likes Received:
    34
    The independent brake is off, the unit is set up for departure.
     
  5. jackdillon37390

    jackdillon37390 Member

    Joined:
    Dec 18, 2020
    Messages:
    43
    Likes Received:
    20
    Is the Parking Brake off? that will probably be it
     
  6. solicitr

    solicitr Well-Known Member

    Joined:
    Jun 20, 2020
    Messages:
    11,875
    Likes Received:
    18,209
    Is the square around the throttle setting in the HUD red? That means an interlock is in place (brakes or doors). Check the doors, and then try moving the throttle to Min and back to Off and see if it resets.

    Also, do you have AFB on but set to 0 km/h?
     
  7. Vectron383

    Vectron383 Member

    Joined:
    May 21, 2020
    Messages:
    32
    Likes Received:
    34
    It looks like the parking brake was on, I have now fixed this. I was thrown because I'm not used to having the parking brake on!
     

Share This Page