Re50 Br146.2 - Train/passenger Lights Off

Discussion in 'TSW General Discussion' started by saxon#3093, Sep 22, 2021.

Tags:
  1. saxon#3093

    saxon#3093 Member

    Joined:
    Jul 14, 2021
    Messages:
    58
    Likes Received:
    87
    was running one of the RE50 BR146.2 night scenarios on the new Dresden DLC. the passengers were in the dark. I could not find any switch in the cab to switch them on. anyone else had this and whether this is intentional or a bug?
     
  2. adlian_cc203

    adlian_cc203 Member

    Joined:
    Sep 29, 2020
    Messages:
    77
    Likes Received:
    40
    You need to start the "Train Line" switch first despite it already being in "On" position.
    You can find the "Train Line" switch to the right of the MCB switch. Toggle and hold the switch to "Start" for a few seconds. In my case three seconds is enough and then put it back to "On" position.
    After this, turn the "Passenger Light" switch to "On".

    Hope this works.
     
    • Helpful Helpful x 1
  3. saxon#3093

    saxon#3093 Member

    Joined:
    Jul 14, 2021
    Messages:
    58
    Likes Received:
    87
    many thanks - I'm at work at the moment so can't check immediately - but I couldn't see a specific passenger Light switch. Where on the 146.2 desk is it? if you are able to provide a screen shot at some point would be grateful
    thanks again
     
  4. adlian_cc203

    adlian_cc203 Member

    Joined:
    Sep 29, 2020
    Messages:
    77
    Likes Received:
    40
    The Train Line switch is the red one (the one with a gray bit on the top).
    The passenger light switch is the green one.
     

    Attached Files:

    • Helpful Helpful x 2
    • Like Like x 1

Share This Page