Platform: Steam Loco / Cab: Class 377 Weather Settings: Default Date: Default Service Name / Time: Journey mode, chapter 4 service 1A34 London Victoria to Brighton Issue occurred roughly how long into the service: Approx 16:15 which is the due arrival time at Burgess Hill and approx 16:34 held at the signal. Detail of Issue: Arriving at Burgess Hill once loading passengers completes the game CTD. Restarted the service and saving at every station before opening doors. Once down at Burgess Hill again, same issue, CTD on loading passengers. However, game was saved so loaded up that save and continued with no crash once again to Brighton. A red signal T421 just before Preston Park was showing danger, AI service was ahead in the station but stuck not going anywhere. Ended up waiting at the red for 15 minutes. By pressing "8" for external free camera I went to the stuck AI service sat at Preston Park, opened the door and tried to adjust the power handle, which was successful and the service managed to get going. After I was able to proceed into Brighton. How many other DLC do you have installed: Everything Link to a video: None
** CRASH TO HOME SCREEN ** VIRTUAL MEMORY ** Random system crashes due to low virtual memory. Platform: XSS Loco / Cab: 377 and 378 Weather Settings: [Default] Date : all months Service Name / Time : all services and journeys Issue occurred roughly how long into the service : happens randomly Detail of Issue: since release How many other DLC do you have installed: All DLC installed. error message on XBOX SERIES S. Virtual memory to low. Happens randomly at Victoria, Gatwick and Brighton. thanks.
MATT I had this same issue! DIFFERNCES!!!: My platform: Xbox Series S Date and weather were default for the Journey choice. I have all available DLC packs installed. Exactly the same issue occured. Stopped at Brighton, hit button to open doors and was booted back to Xbox dashboard
Booted to dashboard. Platform: Xbox Series S. Loco: 387 12 car unit. Weather: default. Date: default. Service name/time 1S28/5D36 Lon Vic - Gat/Gat - LW depot. Issue: Travelled from Lon Vic to Gat with no issues. Arrived at Gatwick and set doors to load passengers. Clicked to external free camera and floated over to see what service the 166 was running. Clicked camera to return to cab when it said wait till 09.03 and the screen blacked and set back to Xbox dashboard. I have all available DLC packs installed.
Note I have removed all mods while playing London Commuter Platform: Steam Loco / Cab: 387/2GX Weather Settings: October, Light Rain, Windy Date : October Service Name / Time : 1D24 Issue occurred roughly how long into the service : Approx 1 hour 6 minutes Detail of Issue: AI train running with open doors How many other DLC do you have installed: pretty much all of them Link to a video: at 1:49:21 you'll see an AI train running out of Brighton with its doors open, the doors shut one by one as they come closer to my train [
Note I have removed all mods while playing London Commuter Platform: Steam Loco / Cab: 387/2GX Weather Settings: October, Light Rain, Windy Date : October Service Name / Time : 1D24 Issue occurred roughly how long into the service : approximately 15 minutes Detail of Issue: TPWS stopped me with no warning chime so I did not acknowledge. Events with video times 57.30 - AWS chime for double yellow - acknowledged and sunflower illuminated - on the way into East Croydon travelling towards Gatwick 58.01 - ran over a track magnet but AWS did not chime even though signal in sight is yellow and the sun flower went black 58.04 - TPWS puts the brakes on and stops the train 58.09 - sun flower illuminated as I approached the yellow still as TPWS still stopping the train How many other DLC do you have installed: all of them except a few locos Link to a video: at
Going towards Brighton around 3 miles before East Croydon, there is a bit of scenery missing between the tracks, see screenshot below. I noticed that on some platforms, the PIS boards are not working properly. They miss the times, see screenshot below. This was at East Croydon, I've seen the same at Gatwick platform 5 and some other stations I can't remember from the top of my head. And at Gatwick platform 7, passengers are leaving the train, but not the platform, they are stuck right outside the doors.
Steam Edition, in the 377 Weather: October fog Service Name / Time : 5B03 Selhurst Depot - Selhurst After leaving the depot, you're told to wait until 6:08 at a red light. Having stopped in the location (at about 6:04), I got the 'bong' at 6:08, but the instruction didn't change and the light was held at red. At 6:12, a Milton Keynes train came past and stopped in the station. At 6:14 I got a second 'bong' with the objective changing and the MK service left after a bit, and so I drawed up to the platform. It was a nice run following it, but I was about 6 - 8 minutes late as a result, so only got a bronze medal . I wasn't bothered about the bronze medal, but I know others will. Perhaps make the service start at 06:07, instead of 05:59 and then delay all the timings by 8 minutes? Other DLCs installed: Great Western + Diesel Legends, Tees Valley + 31 & 20, East Coastway, Rapid Transit + 182, Ruhr Seig Nord + 155, Main Spessart, Rhein Ruhr Osten, Hauptsrecke Rhein Ruhr + 101, Munich, Southeastern + 465, Cathcart, Dresden.
Also, while I'm here, I found this at East Croydon P5. And Network Rail needs to give its engneers a good kick up the backside if they think this on the approach to Clapham P14 is safe.
Platform: Steam Loco / Cab: 377 Weather Settings: Journey Mode Date : Journey Mode Service Name / Time : 1R14 to Reigate Everything works fine until Mertsham station. Before arriving Redhill I encountered a red signal. After a brief wait I took the free camera to check out what is happening at Redhill. - Platform 0 where the stop marker is was taken by previous service - PIS shows Reigate - Platform 1? was occupied by a 166 to Reading and a 377 behind it. The 166 had a green signal however it missed its departure time by quite some minutes and did not move with the doors open -> I guess this is the root cause of the delays. What I managed to do is disembark my train, walk 700 yards and press the door close on the 166 which then promptly left the station. Following this the 377 behind it also left and went its way. After brief wait the 377 to Reigate also left which allowed me to pull up to the platform. After leaving Redhill my service was again stuck at a red, having 20 minutes delay. A short walk up to Reigate and the 166 is there 30 minutes late with a green signal and open doors not wanting to leave. Close the doors manually and the 166 leaves unblocking the 377 behind and finally my train as well. Sorry for the long story, I realized something was wrong when it was too late to take a video. It totally looks like the 166 is bugging up and failing to close the doors and then causes a snowball effect. I did not encounter it in any other services.
First journey mode Victoria to Brighton Frame rate extremely poor at start when setting cab Sounds through out journey keep disappearing Crashed game at end when opening doors PlayStation 5 Only British DLCs installed
Yes, the 166 is deffo the cause of problems at Redhill, it's happened to me on several occasions now, I reported my original problem a few posts earlier.
Platform: Steam Loco / Cab: Both 377 and 387 Weather Settings: Light Clouds Date: October Service Name / Time: All Services tested (between 0600 and 0800) Issue occurred roughly how long into the service: Whenever a long tunnel is approached Detail of Issue: When entering long tunnels elements of light appear visible in the distance brightening up the right tunnel side. This occurs on several long tunnels but due to unfamiliarity with the area I couldn't tell you which tunnels. Occurs mainly when travelling to Brighton, haven't witnessed it in the direction of Victoria but also have only completed 1 service in total as all others have crashed on arrival to Brighton for disembarkation and so have stopped playing this DLC. How many other DLC do you have installed: Everything except West Somerset Link to a video: None, picture below.
I've also got the same issue, the game has only crashed twice for me so far but both were 1.0 and 1.2 miles from Clapham Junction after departing Victoria - however I can complete the service next time after restarting.
As an aside, I know this thread is more for timetable issues, but I’ve now played 5 varied services without any issue whatsoever. I don’t have GWE or WSR installed at present, but if I shouted out some services would other players be prepared to test, then we can see if it’s install/PC/PS4/PS5/Xbox specific? The services I’ve played are: Service Mode; 2K09 0751 West Croydon-London Victoria 1R24 1107 London Victoria-Reigate (only issue no AWS horn at Selhurst platform) 2I46 1709 London Victoria-Epsom class 387: 1M19 0712 Brighton-London Victoria 1U37 0951 Gatwick-London Victoria Weather was October, light clouds. Playing on PC/Steam.
Tried to this service for the 3rd time, this time I had started it after the game had restarted beforehand. However the exact same issue occurred with the same cause.
Hey Matt, I firstly want to say how much I truly love this route. This is by far the best experience I've ever had in a train simulator. The world feels alive, the scenery and detail is amazing, and just the fact that there are so many trains and services running around, all dynamically happening in real-time controlled by an AI dispatcher just gives it such an authentic immersive quality I can't explain... but I love it. Anyway, I do however experience a crash, so I thought I would try and help out with some info; Platform: Steam Loco / Cab: Class 387 - A Cab Weather Settings: Default Date: October Service Name / Time: 1W30 London Victoria to Brighton Issue occurred roughly how long into the service: 55 Mins Detail of Issue: After arriving in Brighton, I opened the doors. The controls then stopped responding, and shortly afterwards, the game crashed to desktop, noting Unhandled Exception: EXCEPTION_ACCESS_VIOLATION reading address 0x0000000642c0f67f. My systems specifications are; AMD Ryzen 9 3900X GeForce RTX 3080 (10GB VRAM) 32GB DDR4 Memory Installed on 1TB NVME drive Graphics settings were all set to Ultra / High (maximum) and the game was running in Fullscreen Mode at 3440x1440. G-Sync was also enabled, and it may also be worth noting that TrackIR was enabled and in use at the time. How many other DLC do you have installed: London Commuter Nahverkeh Dresden Boston Sprinter Cathcart Circle Southeastern High Speed Isle of Wight Sand Patch Grade Schnellfahrstrecke Koln London Underground Bakerloo East Coastway Tees Valley Line Northern Transpennine Long Island Railroad West Somerset Railway Rapid Transit Great Western Express Hope this is helpful to you!
Platform: Steam Loco / Cab: Class 377/387 Weather Settings: Any Date : Any Service Name / Time : Any Terminating Service Issue occurred roughly how long into the service : At the end of a terminating service or swapping to another service. Detail of Issue: When swapping services or going to another unit, the AI has issues taking over the service I've left and the train will not leave. The train does not move even after being given the route which then blocks other services. Link to a video: N/A
I tried two services you recommended on Xbox One with the same weather settings (see below). Unfortunately I had issues with both. This service crashed for me between East Croydon and Selhurst after nearly 45mins of play time. This crashed right at the start while loading passengers. However, I repeated and it worked, although Victoria was extremely slow FPS. I'm getting really tired of this game not working properly.
Platform: PC Loco / Cab: On foot / GX387 Weather Settings: [Default] Date : October Service Name / Time : Spawned on foot, Burgess Hill, 07:40 Issue occurred roughly how long into the service : 4 min Detail of Issue: GX387 scheduled to call at Burgess Hill on Brighton-bound service at 7:44 comes to stop and then immediately moves off again without loading passengers. How many other DLC do you have installed: Most of them
Playing on ps5 Rerouted scenario Weather is default Crashed approaching East Croyden. Full safety systems on, also noted no passengers whatsoever on any trains.
PS5 quarry line quandary scenario Dlc's- 22 installed I'm not sure what the weather is or anything like that because it's a scenario it pretty much crashes the minute I started up goes into a loading screen loads for a little bit and then it crashes thx matt
Platform: PS5 Loco / Cab: 377 Weather Settings: [Default] Date : April Service Name / Time : 1F12 LV to Littlehampton and Ore 07:44 Issue occurred roughly how long into the service : Almost immediately Detail of Issue: Game crash - Spawned in, used right arrow to change internal camera to set AWS, accidentally went to next camera (headout right), then went back to previous camera and the game crashed at that point. Restarted with the same settings and was able to complete the service. How many other DLC do you have installed: All the layers for this route. Have had to remove some DLC to have space for the last two Rush Hour routes to appear.
Found another one this morning Platform: Steam Loco / Cab: Class 377 - 4 car Weather Settings: 75% cloud and 25% wind Date : October Service Name / Time : 1M22 / 1039 Victoria - Reigate Issue occurred roughly how long into the service : 15 minutes Detail of Issue: Two issues: 1, Spawned on foot at Victoria 1035, walked to the train and started it that way. Left Victoria fine, but looked at Clapham and the center yellow doors on the rear cab were open (left Vic shut) HUD said they were locked, and clicking them did nothing, they stayed open. All other doors were fine. EDIT: This is happening on any service you walk to and start, no matter where or 377/387 4, 8 and 12 cars Secondly, and the big one. Leaving Vic and Clapham Junction are fine, but East Croydon onwards there are no objectives for loading passengers. As soon as you stop, the objective jumps straight onto the next station. The schedule shows the "Load Passengers" with the times, but as soon as you stop, both complete at the same time. So you don't actually need to open the doors to complete the service beyond Clapham Junction. Also finding if I walk to the service and not select it from the menus, I don't have any tail lights, or somehow the headlights on the rear cab! If I don't manually turn the tail lights to "On" in the last cab, they're off. The "Auto" function for them doesn't seem to work. Again getting this with any train I don't start via the menus. How many other DLC do you have installed: RH x3 / SEHS / Class 465 / No mods
Platform: PlayStation 4 Loco / Cab: 377/1 Service Name / Time: Fast Lane (Scenario / Journey) Issue occurred roughly how long into the service: There seems to be a reversal of goals in this scenario: - 1st Stop at Location (East Croydon); - 2nd Get Moving; - 3rd Load Passengers. State the goals in that order, it is not possible to move forward. I believe "Get Moving" should be the first goal.
Platform: Steam Loco / Cab: 387 Weather Settings: Rainy (activated from journey mode) Date : October Service Name / Time : 1M23 Brighton to London Victoria Issue occurred roughly how long into the service : At Gatwick Airport Detail of Issue: My train completely unloaded all passengers at Gatwick, and didn't pick up any. This meant that the entire drive from Gatwick to Victoria had no passengers on board.
Platform: PlayStation 4 Loco / Cab: Main Menu Service Name / Time: Main Menu; Issue occurred roughly how long into the service: In the main menu, in the operator filter the LBN "Southern" logo appears with a different logo from ECW, and when filtering they appear to be two different operators. (Ball with different shades of green and white and yellow letters, respectively)
Platform: Xbox one Loco/cab: 387 and 377 Service name: different services The game keeps crashing between Clapham Junction and London Victoria
Platform: XSX Loco / Cab: 377 Weather Settings: light cloud Date : October Service Name / Time : 1A06 Victoria to Brighton, 0823. Issue occurred roughly how long into the service : End of service, Brighton Detail of Issue: unable to complete service at Brighton. "Unload passengers" in top right of screen remains, even after opening and closing doors.
After a trip to all Stations, here my Scenery Feedback (Not Game braking, but can be fixed with a small effort): To start with the positive, after watching a cab Ride from a Thameslink driver from Brighton to London Bridge, i have to say London Commuter is made really well and driving the route is just enjoyable over its entire leght. On the stops as "Passenger" i noticed few things listed below: 1) Purley Oaks: No Way to change from Platform 4 to Platform 3 due invisible Wall 2) Merstham (Mind the Gap) : Platform 2 distance to the Rails is Way to much 3) Wivelsfield: PIS not working 4) Preston Park: No Way to change from Platform 1/2 to Platform 3 due invisible Walls 5) Battersea Park: No Way to change from Platform 2/3 to Platform 1 due invisible Wall 6) Streatham Common: Parts of the Platform 1 have no 3D object, so Player is falling down on top of the grass 7) East Croydon: Distant Clear Text at Platform 1 (Picture) 8) Reigate Branch: After Redhill where the curve into Reigate branch ends, there is a fence going up in the air (right side reigate branch, pic below) 9) Three Bridges TMD: Fence entirely in the air 10) Plane 3D Model: Adding another 2 Engines to the Plane would make it look better, or putting the engines closer to the center
So many problems, I've had to add this page to favourites! Platform: XB1S Loco / Cab: Class 377 Weather Settings: Clear, then a hint of cloud level and wind strength added Date : [Month] April Service Name / Time :1P13 London Bridge to Caterham and Tattenham Corner at 08:32 Issue occurred roughly how long into the service : A few minutes, at first 2 stops. Detail of Issue: Passenger loading at first two stops - South Croydon and Purley Oaks - was instantly completed as soon as the train stopped. The objective just jumped straight to the next "Stop at location" without even opening a door! And incidentally, the speed set control didn't function as the max speed couldn't be changed. It changed in the control's readout, but not on the cab's gauge. All DLCs installed.
Platform: PS4 Loco / Cab: 387 Weather Settings: [Default] Service Name / Time : 1M03 1748 ex Brighton Issue occurred roughly how long into the service : Held outside Wandsworth Common at a red. Detail of Issue: Checked the map and there are trains stood at reds all the way to Victoria. Checking the map, looks like a unit is stuck trying to arrive at Victoria. Cannot finish scenario; gave up after waiting for 10 mins when nothing moved. A truly amazing Timetable but unplayable on PS4.
Platform: Steam / PC / Season Ticket Loco / Cab: Class 377 Weather Settings: cloudy Date: Default (actual date? 11.Oct.2021) Service Name / Time: Time table, 15:37 1R42 London Victoria to Reigate Issue occurred roughly how long into the service: ? Detail of Issue: After leaving Merstham, before arriving in Redhill several yellow signals, then red. Nothing goes on. In the map it looks as two (or more?) trains in front are standing at red signals too. So my path is blocked. I was in time, no delays (and if, it should <1min). I´ve ried to call dispatcher, but I´m not allowed to pass red signal because my train is off the path (ore something).??! The ride from London until then has some few yellow signals bevor Clapham, Croydon and somewhere too, it seems that one train was driving in front of me. Dont know if this is normal, but was nice to drive not to have all green. How many other DLC do you have installed: A lot but not all available addons, all from Rush Hour and last before that was Glasgow Cathcart Link to a video: None Platform: Steam / PC / Season Ticket Loco / Cab: Class 387 Weather Settings: default Date: default Service Name / Time: Journey 1st one after Tutorial drive, Express from London to Brighton Issue occurred roughly how long into the service: At end of journey in Brighton; UE4 error Detail of Issue: Arriving in Brighton. Train stopped, doors opend. I´m not sure when the error appears: doors closed? Short before the scenario should end and bring back to analysis of journey, TSW quits me suddenly to desktop with UE4 error How many other DLC do you have installed: see above Link to a video: None, but picture
Hi Matt, On Friday, I made a post here which includes a video that highlights the start up procedure on the Class 387 (it is the same with the Class 377) when at London Victoria as well as at Brighton. The difference is showing how much slower it is at London Victoria compared with starting from Brighton. London Victoria in general feels very laggy at the moment. I am on PS4 if that helps.
PlayStation 4 All Services / Locos Tunnel Near Redhill, 9.2 km from Gatwick Airport, it is not completely dark, there is a light part, similar to the shadow issue.
Platform: PS5 Platform: PS5 Loco / Cab: Class 387 Weather Settings: Preset Date : Preset Service Name / Time : 1D40 in journey mode Detail of Issue: Departed the platform at Victoria and then the game crashed to home screen. Hadn't even reached the train sheds on the outskirts of the station How many other DLC do you have installed: GWE, SEHS, class 465, ECW, NTP, WSR Update - once I closed the door before leaving, I saved the game. Appears to prevent this crash from happening. I have used the save function to prevent another crash which was reported here, strange? Update on the update - just crashed further down the line...
Platform: Steam Loco / Cab: Class 377 - 8 Car Weather Settings: Full cloud, 25% wind, 50% precipitation. 20% wetness Date : October Service Name / Time : 1H15 / 0941 Littlehampton & Ore - Victoria Issue occurred roughly how long into the service : Arrival into East Croydon Detail of Issue: Stopped at East Croydon and the game CTD'd as the doors were opening. I also didn't open the doors, they auto opened as soon as I stopped. How many other DLC do you have installed: RH x3 / SEHS / Class 465
Platform: Steam PC : Nvidia Geforce GTX 1070 8GB RAM, i9 9900k Loco / Cab: Class 387/2 Weather Settings: Journey Date : Journey Service Name / Time : 1M03 Brighton to London Victoria Service: 1M03 Brighton to London Victoria Detail: Game Crash at the very end of service. Was crawling into Victoria and was within a few ft of the stop marker when the game crashed DLC: GWR, Rapid Transit, Northern Trans-Pennine, Long Island, West Somerset, East Coastway, Tees Valley, IoW, Southeastern High Speed, All Rush Hour DLC's
Not a timetable issue but I am just doing a Brighton - Victoria run and there is no 8 car stop sign at Hassocks station. edit: guard buzzer no longer works? Pis on outside and inside of train is slightly too fast.
Platform: Steam Loco / Cab: 387/GX Weather Settings: [Default] Date : October Service Name / Time 1W30: Issue occurred roughly how long into the service : 53 minutes after arriving into Brighton Detail of Issue: arrived into Brighton driving with Raildriver and using external camera to show the arrival, successfully stopped just before the buffers then the game crashed to desktop with an Unreal engine crash. How many other DLC do you have installed: Most of them Link to a video:
Platform: Xbox Series S Loco: 377, 4 car Weather settings: Default (October, clear) Service name: 1R04 London Victoria to Reigate Issue details: Service failure: Vehicle derailed immediately after master key activated, three attempts, all failed at this stage DLC installed: roughly half to avoid issues reaching Victoria EDIT: restarted the game, same issue Edit*2: didn't touch my controller after restarting the service, still have the same bug, completely unacceptable
Just tried the freight service 7V00 everything fine till East Croydon then get a red light , sit there for a while and notice train in station ahead of me does not move. Decide to jump out and go to station, get there and train is running 6 minutes late. Open door on train then close it and train then leaves. I am then able to continue my journey although get stopped again shortly after. Do same thing as before and I am able to continue. Noticed a lot of ai not moving. Maybe the problem is the ai trains are missing the unload/load instructions which prevents them from moving off once they arrive at a station.
Platform: Xbox One Loco / Cab: Class 377/4 SN - 8 car Weather Settings: July Clear In-Game Date : 15th July 2021 Service Name / Time : 2B53 Sutton - London Victoria Issue occurred roughly how long into the service : 1 minute Detail of Issue: I spawned to Clapham Junction on foot at 12:50 with July Clear, and I got on the 2B53 Sutton - London Victoria. When I rode the service up until one minute into riding, it just suddenly crashed and went back to my Xbox Home Screen.
Platform: PS5 Loco/Cab: Class 387 GX 4 car Weather settings: 3/4 clouds, all others minimum Service name/Time: 1M19 Brighton - London Victoria Issue occurred how long into service: 55 or 56 minutes Detail of issue: Game crashed to PS report when opening doors at Victoria after arriving. How many other DLC installed: 29 (19 routes, 10 locos). Sorry, no video or screenshots.
Platform: PC Loco/Cab: Class 387 GX 4 car Service name/Time: 1W48 London Victoria - Brighton (or is that Gatwick Airport?) Issue occurred how long into service: immediately Detail of issue: Station PIS shows train terminating at Gatwick, whereas timetable view, on-train PIS and the actual stops show that the service continues to Brighton where it joins another train. All passengers get off at Gatwick and I'm driving empty to Brighton - is this intended?
seems generally be happening: no AWS alarm by arriving short before London Victoria station. The point where 20mph is coming, AWS active, seen in HUD, but no sound.