Aerosoft Freiburg - Basel (2018) Reloaded

Discussion in 'General Discussion' started by jeff.engle, Dec 10, 2021.

  1. jeff.engle

    jeff.engle Active Member

    Joined:
    May 27, 2021
    Messages:
    115
    Likes Received:
    36
    I decided to get the Rhine Valley: Freiburg - Basel route after reading about the mod from Railomanie that fixes many of the issues with the route. Thank goodness for Google Translate! My question is regarding the route folder to update. The mod has a folder:

    ...\Content\Routes\113b4589-93d2-423f-91bc-7f2f7acbbda3

    However I don't have a folder with that name. In my installation, the Freiburg-Basel folder from my installation is:
    ...\Content\Routes\a7befb00-8969-4dcc-a3ef-6a902e06f7ca

    Should I just copy the content of the mod's 113b4589-93d2-423f-91bc-7f2f7acbbda3 over the installed a7befb00-8969-4dcc-a3ef-6a902e06f7ca?

    I'm in the process of making a backup of the route now just in case but wanted to check to see if anyone here has applied the mod and how they applied it.

    Thanks!
     
  2. torfmeister

    torfmeister Guest

    Just install it as it comes. I don't have that mod but if it is done in a good way it creates a new route so the original is not touched. It seems ok, it will reference the original route assets it needs. Don't see a problem here.
     
  3. frank351981

    frank351981 Active Member

    Joined:
    Feb 7, 2020
    Messages:
    157
    Likes Received:
    107
    It uses a clone of the route. There is some further notice in the readme that is unusal for those installations: you must go to the original route (if there´s a Main content.ap it must be unpacked to see following), then into "Terrains" and copy the directory "Textures" into the same directory level in the route clone.
     
  4. jeff.engle

    jeff.engle Active Member

    Joined:
    May 27, 2021
    Messages:
    115
    Likes Received:
    36
    Thanks! I must have missed that in my Google Translation.
     
  5. 749006

    749006 Well-Known Member

    Joined:
    Dec 10, 2016
    Messages:
    8,421
    Likes Received:
    2,675
    Having copied the Assets and Content folders to your Railworks folder you then go to step 2 translated via Google

    Go to the following folder: "RailWorks \ Content \ Routes \ a7befb00-8969-4dcc-a3ef-6a902e06f7ca \ Terrain \" and copy the complete "textures" folder. This includes the missing distant terrain.

    Now in RailWorks \ Content \ Routes \ 113b4589-93d2-423f-91bc-7f2f7acbbda3 \ Terrain \ simply paste the copied folder

    Complete! Since the update is installed as a track clone, only the textures for the 40ft change on the original track.

    Please note: If you use the Steam version you have to unzip the "MainContent.ap" file to see the "Terrain" folder!
     
  6. jeff.engle

    jeff.engle Active Member

    Joined:
    May 27, 2021
    Messages:
    115
    Likes Received:
    36
    Got it, thanks!
     

Share This Page