I have Problem wit BR 612 Throttle.After train Stop I can push throttle only to 1%-this is locked.I do not know what is (bug?9.
Is there a red square on the speedometer HUD? Set throttle to off, brakes set to running and if you closed the doors interactively, ensure the switch for the doors is put back in the "lock all" position. I noticed a bug where sometimes there is still a red square after everything was fine...flip the power switch to off and then on again fixed it.
It’s a traction lock. Make sure the following points are as described: doors closed door selection lever to “lock all” reverser forward power on brakes released (brake lever in “running”) If all of those things are as needed, put the reverser into neutral, switch power off, switch power on, reverser to forward, and try again.
Don't release the brakes until the green doors closed message displayed. Don't apply throttle with brake applied, not even 1A. Make sure the brake key is inserted and switched on. Make sure consist and vehicle parking brakes are released. It is very easy to traction lock the 612 and unfortunately the game doesn't walk you through how to recover from it.