PC Sos: Some Colour Light Signals Not Reading Through To The Next Signal(s)

I've mention this in the PC forum, but can the team please take a look at these signals. Hard to ID without screenshots as the SOS signals (quite rightly) don't have ID plates.

Both of these bugs are travelling northbound on the DF lines.

1. Runcorn to Ditton. Ditton has 3 aspect colour light signal before the first home signal. The 3 aspect is not reading the home signal's state. So you see green followed by a red aspect. The 3 aspect signal should show yellow.

location of the 3 aspect colour light:


location of first Ditton home signal:


2. Woodside signal box Woodside Sidings box, between Ditton & Speke has a 3 aspect colour light (distant) signal which is only showing yellow if the (first) home signal is red. It incorrectly shows green if the section/starter signal is red. This 3 aspect signal should show caution if any of the stop signals are red. Maybe a tickbox got forgotten here? I've SPADDED here a few times as you get green>green>red with no warning. I guess the distant signal could also show double yellow as it can't show red.

location of the 3 aspect 'distant'


location of the section signal:

 

Good to hear MRFS, plus those screenshots look v nice Bescot, v tempted to buy...