Experiencing A Crash?

Decided to try again many days later. It still crashes in exactly the same location. Right after decoupling the 5 tankers.

This thread was started in February and it's still an issue in June, makes me wonder how far along they are in figuring out what is causing this.

 

Having crash issues on HHL see this thread in Tech section. I am continuing to explore the issue and will post additional findings in the thread.

PC - Ue Crash On Hhl | Dovetail Games Forums

 

Second time around, no issues - the UE crashes are random and there is no answer, still happening after 3 years or so on new PC, old PC, doesn't matter

 

• What platform are you on: Xbox Series S
• Route/loco: Nahverkher Dresden / DB BR 101
• Service/scenario: 17:24 IC Köln - Dresden
• Location of crash: The "Usual" spot for Out of memory crashes - past Dresden Neustadt about half way to Dresden hbf - around Dresden Mitte.
• All DLCs installed / Clear weather.

 

Unable to play Nahverkehr Dresden at all on Xbox Series S. It always crashes around the approach to and as your leaving Dresden. This happens on and Loco and Unit I Use that gose through the area of Dresden Station. It either come up with the out of memory error or just shuts the game down with no message. It has on the odd occasion crashed so hard that my Xbox has self restarted as it has forced it to completely crash the system aswell. It's sad because its a really fun map and has suddenly started breaking more then it did when it first released at least for me. Unfortunately I can't shear a video or screen shot as I lose them during the crashes.

 

• What platform are you on: Xbox Series X
• Route/loco: London Commuter, Class 387
• Service/scenario: 1U41 - Gatwick Airport to London Victoria - 10:21
• Location of crash (please be as specific as possible): Between Wandsworth Common and Clapham Junction, closer to the latter just as the track curves on the approach
• Weather: Clear skies, light wind, June
• Final comments: I retried the exact same service after switching the Xbox off and on again - was able to complete without problem. Additionally, I played a couple of services after from Victoria, and also had no further problems.

Just to add, this is the very first time I have ever experience a crash on TSW 2 on Xbox Series X during gameplay - to give context, I've played almost 300 services on London Commuter without issue before today. I've noticed a few more stutters than usual too, is this a result of the previous update perhaps?

 

Had my first UE crash in a long, long time. Not sure if it's a one-off, I'll try again later and try to capture a video as well in case it reoccurs.

The game crashed when getting ready to couple to the last five cement wagons at the cement works (SH04 Shunt Inbound Cement Train Part 1, in the BR363 journey mode). Speed at time of coupling was approx. 1 kph. I made contact with the buffers of the stationary wagons and applied brakes. Train was stopped with buffers of both cement wagons in contact with each other. There were some clanging sounds from the buffers as they were jittering slightly. After a second or two the game exited to desktop with an unreal error.

• What platform are you on: PC/Steam
• Route/loco: Ruhr Sieg Nord, DB BR363
• Service/scenario: SH04 Shunt Inbound Cement Train Part 1 (Journey mode)
• Location of crash: Cement works, leftmost siding (when looking from mainline direction).

 

Platform is PC.
crashes straight away after double-clicking TSW2.exe Error: London Brighton pak is corrupt, haven't touched the game for some time which worked fine back then?

 

Platform: PC
Route: Great Western Express
Service/Scenario: Any on original release timetable (Diesel Legends works fine)
Location of crash: Any attempt to load the timetable both on foot and in a service.

Here is the crash report;

`Fatal error!

Unhandled Exception: EXCEPTION_ACCESS_VIOLATION reading address 0x0000000000000000

0x000000014156c5dd TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000141560d50 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x000000014155e6f6 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x000000014155e01a TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000141446361 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000141455726 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x000000014143ab53 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00000001414548f2 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00000001414601e9 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x000000014145f557 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x000000014144bc06 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00000001415f31c7 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00000001415f2e1a TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00000001415f7ec9 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00000001415fc3a8 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00000001415fba16 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000142e57597 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000142e56769 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000142e545d0 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000142e547c5 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000142e4f247 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00000001411687f1 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000140fb947a TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000140dd8165 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000142ab7af5 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000142b7455f TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000142efcb20 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000142eac61a TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000142e97418 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000142eb4df7 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000142a8e683 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00000001407aa5c5 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00000001407b0c2c TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00000001407b0c9a TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00000001407baa3f TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00000001438b4c8e TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00007ff9203b7034 KERNEL32.DLL!UnknownFunction []
0x00007ff9205a2651 ntdll.dll!UnknownFunction []`

 

• What platform are you on: PS5
• Route/loco: Baby Bullet and F40PH
• Service/scenario: All
• Location of crash: Near South San Francisco
• I'm at max DLC's / all weather
• I literally crash every time I play this service... Game often crashes in other locations, especially near San Jose, but it crashes near South San Fran pretty much 100% of the time.

Do we think the eventual preservation update and the PS5 memory fix will help alleviate this issue?

 

Platform: PC
Route: Bakerloo Line
Service/Scenario: N/A
Location of crash: Any attempt to load the 'Bakerloo Line' addon results in the game crashing.

Error Message is copied below,
---------------------------------------------------------------------
LoginId:f973db8a4b11f559a8abd884b3defa65
EpicAccountId:

Unhandled Exception: EXCEPTION_ACCESS_VIOLATION reading address 0x000000010000003f

TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
kernel32
ntdll
---------------------------------------------------------------------

I attempted to fix the issue by uninstalling TSW2 and reinstalling it however this did not work at all.

 

every time I run a service on GWE the game crashes. but if I run a scenario it works. I am running the game on PC steam.

 

Platform - xbox s
Route - BML
Issue - cannot load a route from chapter importantance of being on time, system crashes with a memory issue advised to reduce screen resolution. I have un installed and reinstalled dlc. This has made no difference. The game will run some senarios and tumetable however it is very unstable, crashes occur when between Clapham and Victoria. Very frustrating because I really like the dlc. Thanks for looking at my post.

 

Today I was playing the 'Container Shuffle' journey on 'Rhein-Ruhr Osten: Wuppertal-Hagen', driving the G6 loco on my PC. I had three UE4 crashes. Two of them occured when I was coupling to wagons in a siding. The third occured when I was creeping forward to a stop marker, during shunting.

Something is wrong with the game.

 

Hello DTG
My console Xbox One.
Create a scenario in creators club using London commuter. Reigate to Victoria. I have added 14 trains which includes the players train. Class 377, Class 313, Class 387 Gatwick express. Class 47 and MK1 coach's. LMS Jubilee, Class 66 freight.
Some have different liverys from the creators club from other players. Crashes when I get to East croydon and at Victoria opposite the signal gantry and BTP Station on the left. Will upload the picture I took of the crash error message I get. The game completely closes down and some times freezers and shuts the game down.

Kind regards
Andy

 

• Platform: Xbox.
• Route: Spirit of Steam: Liverpool Lime Street - Crewe.
• Service/scenario: (All) Through/Express Freight to and from Edge Hill to Basford Hall Yard.
• Location: Salop Goods Junction Down Liverpool Independent.

 

Platform: PlayStation 5
Route: All and Home Screen

Continuous crashing, kicks me out of the game, has been happening for a long time and mostly on TSW2

 

I'm playing on Xbox Series S and London Commuter is really getting me pissed off, i can't play any services out of London Victoria using 387 Gatwick Express or the 377 as i keep getting out of memory crashes even though i don't have 4K turned on. This has been a problem since rush hour was released with no sign of any solutions. I'm a paying customer and i expect to play a particular route especially as I've payed £24.99, i have even upgraded from Xbox One S to a Next Gen console Xbox Series S and still getting issues with Out Of Memory crashes.

 

I've recently started to get these crashes.
It freezes and then crashes the game

• What platform are you on: PC
• Route/loco: Any
• Service/scenario: Any
• Location of crash: Not one location, can happen on any part of a route

Here is the UE crashreport:
Unhandled Exception: EXCEPTION_ACCESS_VIOLATION reading address 0x00000001037ba7f8

PhysX3_x64
PhysX3_x64
PhysX3_x64
PhysX3_x64
PhysX3_x64
PhysX3_x64
PhysX3_x64
APEXFramework_x64
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
kernel32
ntdll

 

• What platform are you on: PC
• Route/loco: Loco - BR146
• Service/scenario: Scenario - Saturday Circuit
• Location of crash (please be as specific as possible): At Lohr Bahnhof Station

 

• What platform are you on: PC
• Location of crash (please be as specific as possible): Was on the menu searching for a route

 

(PC) The game crashes Timetable mod. Arosa Line at Lüen Station approach, Peninsula Corridor at S.Francisco Staiton approach (I haven't checked it out recently. So dont know if it has been fixed or not)

 

UE4 crash when uncoupling

Platform: PC, Win 10
Loco: BR185.5 (MRCE)
Route: Nahverkehr Dresden
Service: Towing The Line scenario (Journey Mode - Chapter 11)
Location: Niederau

The scenario went fine until the point where I had stopped the train at the instructed stopping location at Niederau, after which I was instructed to climb out and uncouple the rake of BR143s which I had been towing. As soon as I clicked on the coupler the game crashed to the desktop with fatal UE4 error (there were no uncoupling animation or sounds, it just exited the game instantly upon clicking the mouse). I did the uncoupling by climbing down from the loco and walking over to the coupler (i.e. not using an external camera to do the job). No mods, engine.ini customizations or anything of that nature in use.

---

Fatal error!

Unhandled Exception: EXCEPTION_ACCESS_VIOLATION reading address 0x0000000000000000

0x0000000140f1895a TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00000001435ffbd7 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x000000014360623d TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000143606f2a TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00000001435fd528 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000140f1203e TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000141121da5 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x000000014113281a TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00000001411017c0 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x000000014110c729 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00000001410f15d1 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000140903a73 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000140902b32 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00000001412c5831 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00000001412c7bac TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x0000000141412c37 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x000000014140e141 TS2Prototype-Win64-Shipping.exe!UnknownFunction []
0x00007ffd49507034 KERNEL32.DLL!UnknownFunction []
0x00007ffd49642651 ntdll.dll!UnknownFunction []

Crash in runnable thread TaskGraphThreadHP 8

 

Here again the crash bug, this time I made a video of it.

 

Arosaline is crashing everytime I choose the first scenario

 

I been having crashes on the Playstation 4 and also the Boston Sprinter DLC where there air brake sound coming from the ctc cab car continuous It Won't Stop when the brake are applied and on the f40 unit and I also been noticing it kept crashing on the Brighton main line dlc route its very buggy and glitchy at London vic and when on foot the game will say u pass at danger even tho I never past a red signal?

 

Platform: PC
Route: All
Service: Timetable

 

Hello i was playing on Xbox and I was driving the class 313 from Lewes to Brighton I was following the speed limit and then in between Lewes and Falmer my train Flipped over on the tracks randomly and derailed I was trying to complete the Journey but I failed Because of this In game Issue.

 

Plateform : PS5
Route : SKA expansion timetable
Service : all of them
As soon as I’m clicking on one service to play whatever the train, TSW2 crash in the loading screen. I got the BR 101 but I can’t see the IC 1941.

 

Platform: PC (Steam)
Route: Haupstrecke Munich-Augsburg / DB BR 766.2 Cab Car
Service: Any RE Service going towards Munich (I've played RE57001, RE57091, RE57099)
Location: Anywhere near or past Mammendorf

RAM Usage through that area peaks to around 13.5GB of RAM which causes the game to crash, presumbably due to running out of memory (I only have 16GB of RAM in my system). The game itself doesn't crash, it just freezes and in Task Manager it is using 100% of my memory and is either 'Not Responding' or 'Suspended"

 

So on Dresden - Cheminitz I have not yet been able to do a full run between Dreseden and Cheminitz on a RE or RB.
Just today my game froze at Flöha station.
I opened my windows task manager just to see that TSW2 was using an amazing 25GB of ram (and I had no more RAM left) so windows went mad and the game was instantly closed after a couple of black screens and a reboot ...

I am on PC (windows 11) Pretty top of the line specs too.
the route was Dresden - Cheminitz and the service is any stopper service in the Dosto's between Dresden and Cheminitz (or the other way around)

I do not have any crash files nor nothing because the reason it crashed was no more ram... so maybe a memory leak or something I don't know but it is pretty annoying that I just crashed out of 45mins of pure fun and train (hope you can find the bug and fix it DTG I love your product but find it a shame that there still is some bug's like this one.)

 

GWE. I updated the driver to latest from Nvidia, changed settings from ultra to high. It ran once. After crash fails to run everytime.
system, 12900KS, RTX 3080, 32Gb, win 11, steam launched version.

I have tried verifying files, Different graphics settings ie medium, high, ultra and various resolutions from 1080p to 4k. I have switched off g-sync, HAG in windows, limited frame rate in game and using riva tuner. I switched off all potential overclocking of ram, cpu and gpu (just incase of a voltage issue).

I was showing the error to someone when I noticed the following...... I open the game through steam, Select the GWE route and the game crashes. If I however open a different route, then esc back to the switch route option and choose GWE it launches without error.

 

My game crashes at least 3/4 times a day, Xbox 1 S and it’s any London commenter. I don’t thinks it’s specific service. It crashes because it can

 

(while City Sample in UE5 runs smoothly) yet here we still are experiencing multiple crashes on a daily bases . It doesn't matter which route or what service, the game will at some point crash - yes also after a complete clean install - now it's a different address and more strings:

Unhandled Exception: EXCEPTION_ACCESS_VIOLATION reading address 0x0000005553622a4c

TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
TS2Prototype_Win64_Shipping
kernel32
ntdll

 

• PC
• Route/loco: London Commuter
• Service/scenario: Introduction to Class 377/4
• Location of crash The beginning of the mission everything goes well but as soon as we start the train to leave the station the game crashes

 

• Platform: PC (Steam)
• London Commuter - Class 387/2 GX
• Training - Class 387 Introduction
• After the first stop before gets on the second stop

 

• Platform: PC (Steam)
• London Commuter - Class 377/4 SN
• Scenario - Slow Way Home
• Is on the video

 

Hi

Plantform: PS5
TSw 2 Version: PS5
Scenario: Fully Fueled
Route: Sand Patch Grade

In the end of the Scenario Fully Fueled when you uncouple the wagons in the rear loco and when you enter the loco and put in reverse when you press R3 to go to the external camera the game goes into loading screen and freezes then crashes to PS5 menu, this happen 3 times in a row, i dont play that scenario again.


EDIT: I have sent a ticket, now i have received a ticket that the ticket has been closed because has been solved, this is not solved, dont have been released any patch after the ticket with any fixes.

 

Platform: PS4 Pro (30 Routes installed)
Route: Sand Patch Grade
Loco: C40-8W
Timetable Service U877-A and U877-B
I get a CE-34878-0 error on U877-A just before Mance (0.8 miles out) and on U877-B the same about 1.6 miles from Yoder Siding.

Tried multiple times always leading to the same problem.

 

I get the same one.

 

I removed all mods. I think this problem happened many weeks ago, about a month ago
Platform: Steam
Route: London Commuter
Loco: All
Service/scenario: Maybe All, I tried to play many timetables, but the game still crash
(Sorry for bad English)
Here is some part crash report and full version:

 

• What platform are you on: Win10 PC Steam
  
• Route/loco: HBK Hauptstrecke Hamburg - Lübeck / BR 766.2
  
• Service/scenario: BR 766.2 Introduction
  
• Location of crash: Leaving Reinfield - the first station stop

 

PS4
Dresden-Chemnitz
612
IRE1 3081
Game crashed 600:m before the end when I pausen the game

 

PC
Any route
Any Service
All the locations

Just installed TSW3 but same crashing is happening in this "new" version too. I'm getting real tired of paying Dovetail and having same problems for years.

 

when i start the game he close and show the fallow error.

PC/Xbox

 

I reinstal the game and work fine !

 

I had the same issue on the Xbox PC app. Uninstall and reinstall fixed that issue. Now getting a profile create error.

 

Platform: XB1
Route: Riesa-Dresden

Crashes on startup in TSW3.

EDIT: Disregard this, I got it to work by unsubscribing to all the liveries for German routes. Apparently the TSW2 liveries don't play nice with TSW3, I was getting severe frame rate drops and crashes on the SEH and deleting all those liveries fixed it.

 

Plattform:PC(steam)
Routes:SKA,MAG
Service/locacion:After loading into Timetable mode with any loco(havent testet freeroam yet)
My therory on this bug is it having something to do with LZB.
Edit:Randomly no crashes anymore,must have been bad luck.

 

Hi, even after a new installation of sim train world 2, error still with me, always in the london route, thanks

Deleted again all the folders in installation folder, g: drive in my case

Tried in c: drive , same problem with london route

W11 x64 in from xbox in w11