Hello! Hope you're doing well. Thank you for this new version, but there are small problems, and this is happening on the scenario Kassel to Wuzburg: - The signals of the current track are off. The others seem to work. It's not a question of distance as you can see on the picture, there are 4 signals side by side and the one in the current track is the only off. There are multiple signals (single light) on this scenario with the same problem, always on the current track. - Signals missing on the terrain, and the information on the HUD (speed and signals) doesn't match the terrain. In HUD there are lights and speed limits that don't have a corresponding signal on the route. Thank you for your time. Best regards
The signal that appears to be off, is a dark signal. It is discussed at length in the tutorial about LZB.
Dark signals appear in HUD as grey, and it's not the case, it appears as green. I've also failed a scenario because on the HUD the light was red but I didn't had any signal.
Under LZB, the HUD information is coming from the LZB system, and does not copy the signals. Unless you toggle the setting for unabling HUD signal information, the HUD signal light will never be gray.
1st image: LZB dunkelschaltung (dark signal) 2nd image: the signal is an LZB block marker, not an actual light signal 3d image: that’s a Vorsignal (pre-signal) that shows information about the next Hauptsignal (main signal). Vorsignale don’t show up on the hud and never have.