Xbox Series X Scenario Planner Bugged

I wanted to create a Scenario on the Main-Spessart Bahn. I had two Services in Aschaffenburg, one my own and one AI

-My own Service was BR 110 with 4 N-Wagen that stops everywhere.
-The AI Service was a BR103 that runs all the way to Gemünden.

I briefly tested the Scenario to see if these two didn't get in each other's way. When I wanted to continue editing the Scenario, I noticed that the Planner had removed the Trains from the two services.

I then set the Trains correctly again and when I started the Scenario again the Game froze in the Loadingscreen.

Console : Series S

Installed DLC. RapidTransit, BR182, RuhrSiegNord, BR155, BR363, Main-Spessart Bahn, BR204 (Dos Not Work), Rhein Ruhr Osten, Vossloh G6, Hauptstrecke Rhein-Ruhr, BR101, Schnellfahrstrecke Köln-Aachen, BR187, Hauptstrecke Hamburg-Lübeck, Nahverkehr Dresden-Riesa, BR193 Vectron, Tharandter Rampe Dresden-Chemnitz, Schnellfahrstrecke Kassel-Würzburg, Dispolok BR182, Bahnstrecke Bremen-Oldenburg, Linke Rheinstrecke Mainz-Koblenz and S-Bahn Voralberg Lindau-Bludenz

 

This is exactly the same issue I have been getting on Xbox One, I have also made a thread on this and no response from DTG, can either DTG JD or DTG Alex check that this issue has been logged and to look at my thread for further analysis into this issue please

 

I've also opened a support ticket for this, maybe that will help.

 

Hopefully it gets noticed and fed back to the team for analysis

 

Gonna bump this thread as now I'm having the same issue on Sand Patch Grade as I am trying to create a scenario with the Peninsula Corridor F40PH-2CAT and as soon as I reboot the game after quitting it minutes earlier, the train formations disappear but if I load the scenario up, it still loads the formation within the scenario (rather oddly), plus the space in the Scenario Planner service screen where your train formation would be is blank and disappeared like bobbobberdd describes above

Platform: Xbox One S
Game Mode: Scenario Planner
Scenario/Service Name + Start Time: N/A
Step-By-Step Instructions to recreate issue:
1. Go into Scenario Planner and make a scenario on Sand Patch Grade with the Caltrain F40 as the player service
2. Save the scenario and quit the game
3. Reboot the game up and go into the created scenario and select 'Edit' and hopefully you'll encounter the same issue the OP and I are encountering

Hope this gets fixed ASAP from the team if it isn't already being looked at

 

The Support team hasn't responded to my Ticket yet, so I can't say if the Team is aware of this Bug.

 

After looking at my previous scenarios which I have completed in the past (which suffer the same issue), I might have found why it is happening:

It only occurs on trains that don't feature in the base routes' timetable (for example a DB BR 182 (+ Dostos) on Hauptstrecke Hamburg-Lubeck) so any train that utilises 'Off the Rails' mode are the ones which disappear and not the trains which are included within the base routes' timetable (for example a DB BR 112 (+ Dostos) on the same route)

I'm not sure why it does this and it is a bug, or if it is meant to be as it is (hopefully it is the former) and can somebody from DTG (dtg_jan or DTG Alex) make sure that a) this issue is logged and b) that the support ticket sent in by the OP has been passed onto the team and hopefully this gets fixed as soon as possible, thanks

 

I'm not sure that this is the same thing (and I am on PC) but I have a scenario in TSW4 on ECML that appears to 'lose' any train from West Cornwall (CL37 and CL150) in Scenario Creator. The trains, though, are actually still there when you play the scenario in-game, its just that the services appear blank when you try and edit the scenario later on in a separate session. I think, in my case, it is only WCL stock that is involved but that might just be because I haven't noticed anything else yet.

David.

 

That is exactly the same issue that we are having but for me anyway, it isn't limited to West Cornwall Local rolling stock and I used the HHL example above so it seems to occur across all routes

When I was making my Sand Patch Grade scenarios (which I have since cancelled), the train was still in the scenario but the services appear blank like you have said above