End Of Session Message?

Discussion in 'Troubleshooting' started by byeo, May 7, 2019.

  1. byeo

    byeo Well-Known Member

    Joined:
    Nov 13, 2018
    Messages:
    1,315
    Likes Received:
    2,392
    I’ve just started the 18:30 F09-3 service in the GP38-2 and when instructed to go to the bridge which is my first way point, I stopped on the bridge to take a few screenshots of the train above the Harlem River. I was in free mode with the camera and as I moved away from the train I had a message pop up saying;

    “End of session: You have reached the edge of the represented area”

    It wouldn’t let me go back towards the train, then a black screen came up and the service ended. Is this a common occurrence? I didn’t go that far away from the train, certainty not as far as I’ve been in other trains.

    Can TrainSim-Dmitri or anyone else clarify what I did wrong?
     
    • Like Like x 1
  2. Alex02

    Alex02 New Member

    Joined:
    Mar 7, 2019
    Messages:
    26
    Likes Received:
    10
    You flew to far long with the camera
     
    • Like Like x 1
  3. byeo

    byeo Well-Known Member

    Joined:
    Nov 13, 2018
    Messages:
    1,315
    Likes Received:
    2,392
    I used the camera for too long or flew too far away?
     
    • Like Like x 1
  4. Alex02

    Alex02 New Member

    Joined:
    Mar 7, 2019
    Messages:
    26
    Likes Received:
    10
    U used the camera and flew too far away
     
    • Like Like x 1
  5. byeo

    byeo Well-Known Member

    Joined:
    Nov 13, 2018
    Messages:
    1,315
    Likes Received:
    2,392
    But I didn’t, not very far at all.
     
  6. underwaterdick

    underwaterdick Active Member

    Joined:
    Mar 20, 2019
    Messages:
    235
    Likes Received:
    191
    Did the train cintinuc moving off the edge of the playable area? If the points are not set correctly the loco will continue as you are in free camera... I have had this issue with red lights before. Failing a service because I went into free camera to look at something and it went through a red.y fault really because I saw the amber at the previous set but got distracted!
     

Share This Page