hi everyone, I have a problem on tsw4, when I spawn a train for example the M7 of the Lirr in its line, I can't start the train (even having carried out all the procedures correctly). It doesn't happen only with the M7 of the Lirr but even with all the trains, DTG this Bug has been present for more than a month! When will you solve this problem?!?
You're going to have to be more specific on the trains. You have to match the power systems. You can't run an 3rd rail electric train on a diesel only line. You can't run an ac electric on a 3rd rail line. There are bugs however where it won't work but free roam is not free in the sense that you can place any train anywhere. You have to use off the rails mode in scenario planner to run all trains anywhere
I have already mentioned this thread previously but I just wanted to specify that even generating a train that goes only with the third rail in a line with the third rail, even having done all the procedures before leaving, the selector indicator does not move speed remains red, same thing when using a train with the pantograph on a line with airlines it is really a free roam problem with all the trains even in their adequate lines, could you solve this problem DTG, please it was too nice to run in free roam
I would favour an “Off the Rails” option for Free Roam as is the case in scenario planner. I would further suggest that it is switched off by default for the purists but with the option to turn it on for those of us who fancy, say, a trip up the Midland Mainline in a 1938 stock Bakerloo train just for fun.
hi, I tried to spawn an M7 Lirr, the only problem is that after carrying out all the procedures before starting the little square in the HUD at the bottom right remains red (I spawned the M7 in its original line) Is it just my Ps4 problem?
170 is similar, doesn't let you move the reverser and cannot acknowledge AWS unless you click on them with the cursor.
