PlayStation Peak Forest Bug

Discussion in 'TSW General Discussion' started by blueyes#8657, May 13, 2023.

  1. blueyes#8657

    blueyes#8657 Member

    Joined:
    Jun 1, 2022
    Messages:
    26
    Likes Received:
    27
    I have play Peak Forest Railway for a little while now and I found that on some of the Manchester St to London St Pancras services end because it comes up with service failure.

    FYI I have auto fireman on so I'm not sure what the problem is.
     
  2. OldVern

    OldVern Well-Known Member

    Joined:
    Nov 2, 2020
    Messages:
    19,256
    Likes Received:
    38,719
    Interesting because the assumption previously was the failures were happening because people had failed to activate the fireman in manual mode. If it's happening with auto then maybe there is more of an underlying cause. Even caught me out doing the Chinley Gala, yes in manual mode but still doing the brake van tour element forgot to hit F, had only driven a mile or so to the sidings and done the run round move before it failed, on a real steam loco the fire "as is" should have been more than enough to see the loco through this 15 minute trip!
     
  3. ben#4046

    ben#4046 Active Member

    Joined:
    Jun 6, 2022
    Messages:
    288
    Likes Received:
    173
    I haven't experienced this as such although have only done said service on the rail journeys selection. One thing I do notice is the red light signal is sometimes before the stopping point by like 20/30 yards on the final stop. I play with red light assist on so it comes up on the right before the natural stopping point, like it's not quite lined up right on the final platform. I failed a service because of this...is this what you're referring to?
     
  4. andy#3741

    andy#3741 Active Member

    Joined:
    Mar 22, 2023
    Messages:
    362
    Likes Received:
    208
    I know it's an old thread , when I searched Peak forest service failure this thread came up.

    On PlayStation PS4 going to collect limestone hoppers it randomly says service failure and crashes. Just tried it in auto firing mode.

    The 4F sounds like it's in need of major overhaul.
     
    Last edited: Aug 2, 2024
  5. OldVern

    OldVern Well-Known Member

    Joined:
    Nov 2, 2020
    Messages:
    19,256
    Likes Received:
    38,719
    Best to put it in manual firing and open the firebox doors. To all intents and purposes it’s still automatic anyway with no coal or water really moving into the loco. Just make sure you open the dampers a bit.
     
    • Like Like x 1
  6. andy#3741

    andy#3741 Active Member

    Joined:
    Mar 22, 2023
    Messages:
    362
    Likes Received:
    208
    Hey Vern

    I tried the opening and closing firebox doors part, and dampers at 25%. I think some of the timetables on PF still have bugs/crashes.

    I did manage to complete a turn collecting the hoppers and loading them at Tunstead , but in auto firing.

    The Peak forest is a good DLC , I hadn't had a go on there for a few months.

    The 4F looks nice, but it's exhaust is erratic as you know :D
     
    Last edited: Aug 2, 2024
    • Like Like x 1
  7. OldVern

    OldVern Well-Known Member

    Joined:
    Nov 2, 2020
    Messages:
    19,256
    Likes Received:
    38,719
    Glad you finished the scenario.

    Think of steam locos in TSW as slightly advanced Triang Hornby models with the old style sound system (a sandpaper strip in the tender) and the smoke generator!
     
    • Like Like x 1

Share This Page