I'm guessing that you are trying to complete "G6-Sh04 Prepare an intermodal consist". There is a workaround to the red signal issue available...
The SH04 service was originally possible to complete with the release of the G6. However, a patch broke this signal and made the service...
Hello, the timetable G6-Sh04 is still not finishable because the game says on a signal that shows a driving term that you have driven over a stop...
...new routes get all the attention. I'll list only a few as example: - SH04 service on RRO (G6) has been unplayable now for a very long time -...
...remove the problematic services from the jorney mode. even though "G6-Sh04 Prepare an intermodal consist can be played according to the...
You are stuck exactly where I am stuck. This presents an additional problem in that we cannot tell if the final signal not clearing is because we...
Regional editions are available after the official release. So you have to wait.
...services RB57005 / RE57010 / RE57091 on HMA - timetable services G6-SH04 / G6-SH05 on RRO - timetable service 6Z60 on Londen underground In...
Bump because I have been working on Sh05 also. I wanted to share what I have found so far in case you are still working on this too. I have found...
...is an interesting idea. finally a way to compare all DoSto's. I think SH04 or SH05 is where it shows. but the bug is the Vossloh G6 pushing...
Hello : I can confirm that on PC steam TSW4, there is still a problem with SPAD on G6 Sh04
Same on XBox. I've uninstalled the G6 DLC, so I can have RRO journey completed to gold. Thank you, Maik Goltz !
Someone might check G6 services G6-Sh04 and Sh05 on RRO. Broken in #2 and #3. I´d not be surprised if they still continue undriveable.
When doing service G6-SH04 on RRO with the G6 shunter loco it SPADS and you can't continue. You get to the bit where you have to reverse the...
...possibility of getting the broken G6 journey mode services fixed (G6-Sh04 Prepare an intermodal consist and G6-Sh05 Collect and prepare...
...he himself stated earlier in another thread about the problem, that SH04 was completed by him before in journey mode. There are quite a...
IIRC Maik stated previously he had fixed these but DTG for whatever reason are sitting on them, for years now.
...and was able to come up with this unbelievable workaround for G6-Sh04. Here are step-by-step instructions for completing "G6-Sh04 Prepare an...
Actuallly no, I completed both runs in journey mode in TSW2, so, actually it seems to be caused by some dispatcher update with TSW3/4.
...to TSW3 to ........... alsoTSW4? Someone might check G6 services G6-Sh04 and Sh05. I´d not be surprised if they still continue undriveable....
...Screeeeeech ....... After some forum search, I´ve just figured G6-Sh04 is still broken, you´re SPADing at a clear green and I´m doing nothing...
DTG Matt DTG JD I have confirmed that "G6-Sh04 Prepapre an intermodal consist" and "G6-Sh05 Collect and prepare Sggrmss" are both still SPADing...
Just run this with the 363 via the cement Journey chapter and encountered a couple of issues. 1) After coupling the 363 to the tank wagons, the...
G6 Sh04 after coupling to the waggons, the signal shows diagonal white (so proceed) and passing that signal says scenario failed. In the HUD the...
Thank you for the better picture with the signal and HUD in frame.
The Sh04 is also broken. After the coupling on the first train and the signal gives the way, the mission fails because of the "red signal" (which...
...Regardless of when these problems started, the services "G6-Sh04 Prepare an intermodal consist" and "G6-Sh05 Collect and prepare Sggmrss" are...
Yes, I can confirm (PC), signal ZR 266 is the culprit. The bug must be new, I have already completed SH04 earlier. [ATTACH] [ATTACH]
In TSW2, where the loco was released, these SPAD things do not happen. It came up with the route update at some point in TSW3. I can't do much...
...on the main cargo lines, going with the wagons first over the green signal will give you a "fail for running red" - same as in the G6-Sh04...
Black signal encountered in Boele Wagon Yard during SH04 Shunt Inbound Cement Train Part 1
IIRC, the signal is red-but-shunting allowed (red with two small whites- I can't remember the German). This signal requires that you hold the PZB...
...ready to couple to the last five cement wagons at the cement works (SH04 Shunt Inbound Cement Train Part 1, in the BR363 journey mode). Speed...
DTG: "May I interest you in Trainmas competition instead?"
...be completed due to SPADs that occur when crossing green signals: "G6-Sh04 Prepare an intermodal consist" and "G6-Sh05 Collect and prepare...
Finally a post that focuses on the issues and isn't emotive, nor groupthink. Good work!! There is always the dilemma of using resources to build...
...introduced in the recent suspension patch. 9/9/24 Update: Removed "G6-Sh04 Prepare an intermodal consist" since a workaround is now available....
SH04 & SH05 on the RSN start times are 12:20 and 13:15 see you sorting and delivering cement wagons to and from Boele with a run on the mainline...
Forgot to add SH06 in that suggestion too! Nice bit of trainspotting as you await the road.
Separate names with a comma.
