I like this idea, but only if the following are observed for US freight trains fitted with air brakes: 1. If an anglecock is mistakenly left...
Thanks, but I was already going as fast as I could before I got to the gradient. Unfortunately no chance of speeding! The load just seems too...
I'm really enjoying driving the Br185 freight services in this game. However there is one journey I just cannot seem to complete. It is the 12th...
You have to bring the reverser handle with you from the other cab. Click on the housing above the empty reverser handle slot to either remove the...
I believe the Liverpool Cathedral organ has the longest pipes (i.e. the lowest notes) of any organ in the UK. The lowest notes are pretty well...
Anyone know why the rather strange frequency of 16.7 Hz is used?
But the OP said he'd already done a file verification.
In YouTube you need to search under TS not TSW2.
I especially like the tendency for the train to start running down the hill shortly after you have coupled the locos to it, if you haven't applied...
I find it very quick to simply ESC through each of the startup screens. The only thing I don't like about the new UI is the route choice screen...
Yes, how about a BR Class 86 / 87 over Shap summit?
Ha Ha!
I believe Matt said that you get the tick in Journey mode to show that you've played it at the time of year and with the weather the developer...
Just experienced a UE4 Crash Reporter screen when only 0.6 miles from destination, driving a BR Class 20 without any resumes. A subsequent resume...
Playing on PC, I use camera 3 to look through side window of rear loco(s). Open the window to get in close, then you can see and more crucially,...
A similar problem occurs on the other side of the bridge in GWE - Diesel Legends - journey '5A18 Return to Old Oak Common' with a Class 52. Here,...
It's on the front wall of the cab on right side, low down behind the driver's seat. Stand up, then crouch down (C on PC) and probe around wall...
At journey start, you drive a Class 52 light engine out of the yard and climb up to cross a bridge over the other tracks, then go down the other...
You mean the brake pipe flow gauge now works? I've never seen it work!
If two cars fail to couple, make sure they are contacting each other, then apply brakes. Use free camera 8 to unlock one of the couplers, then...
I've found one of these problems on Clinchfield running on PC. It seems to happen at start of a service using SD40. You use camera 3 to check rear...
I've just run this service on a PC using an SD40 in the summer, without any saving and resuming. I got held at a red signal before a crossover...
Tried this scenario today. Brilliant scenario, my favourite so far in all of TSW2! You have to do it in one go. Don't save and resume as it causes...
Thanks. That sheds a bit more light on it. I wonder if Matt has anything to add.
With brakes applied, gauge reads correctly, but when released, it reads 0. This seems wrong to me. What does red needle indicate and why isn't it...
I'd not got Mastery to work on any route until I bought Clinchfield. Now it's logging my Clinchfield scenarios as I complete them.
I thoroughly enjoyed this scenario and am rapidly coming to the conclusion that Clinchfied has taken over my favourite route spot from Sand Patch....
I've just tested this on PC using service N542 Coal Rockwood to Cumberland: GP38-2 YN3b as lead, dynamic brakes give only very small effect....
JWS you beat me to it...
You can see the 5-digit number below the pressure readout on the EOTD changing value as pressure builds. I've ascertained that this 5-digit number...
I'm referring to numbers below pressure window on side of EOTD fitted to back of train. You can view it with camera 3.
Just tried it out on service Q261 Cumberland to Rockwood with C40-8W as lead. [Ctrl] [+] toggles between cabs of both locos at front of train....
Thanks Breb I'll try it out.
Forgive me but what do AB AA and BB represent? I know what an EOTD is, but what is an HOTD?
On PC, [Ctrl] [+] and [Ctrl] [-] will normally navigate you reliably between cabs of locos at head end of a train, but will only sometimes take...
I ran Q261 today with C40-8W as lead and was able to switch on banking comms which then worked as it should. The pair of helpers at the back were...
Just ran Service Q261 using C40-8W as lead loco. Noticed that when heading west, distance to objective (Mance) stopped counting down at 5.1 mi....
I suspect you may have a bottleneck in data transfer speeds to and from the portable HDD. Have you tried installing the game on an internal drive?
Anyone know how to fully shutdown electrics on AC4400CW? I've turned off all switches and circuit breakers I can find, yet computer displays...
It would be really good if player could take an EOTD from say a storage locker in loco and manually attach it to back of train. You could then...
Just spent a few happy hours rounding up all locos and arranging them neatly around the turntable. After putting each loco in position, I shut...
Just spent a few delightful hours playing in the yards of Oakville Subdivision. I think this is a brilliant route. Using the scenario in which you...
I've found the same. Today I was working a scenario in Sand Patch Grade. Having come to a stop as requested on an uphill section, I saved it....
I've just run an hour on Tees Valley - no crashes. Happy.
Just spent 2 hrs running SandPatch Grade's Fully Fuelled scenario. Drove from Cumberland Yard to the summit with no crashes. So far I'm very happy...
That's disappointing. Have you tried verifying the games files?
I think I've solved it. I verified the Steam files and found a corrupt file. It's now been downloaded again and verifies ok. I've loaded SPG and...
Separate names with a comma.
