Doesn't one of the maps have PZB that require you to be under 45 either way but in 120 sections?
How do I know if an approaching PZB transmitter is VU1 (85/70/55KMH), VU2 (45KMH) or VUM (10KMH) application of speed restriction if the vehicle...
I seem to get black screen in the finished video despite the TSW (TSW prototype) box being selected as visible in OBS, it worked with TSW 3 along...
Shouldn't the brakes on the 363 still work if it is coupled to another two piped loco? Also, if this is causing the problem with an air starter...
I have not seen that tutorial, I will check it out tomorrow. Thanks for sharing. Edit: By the information that is not public information, I meant...
It was timetable mode but placed as if it was free roam, is that what is causing it not to restart?
I have watched the full PZB & German signal tutorial and the new signals are not covered.
I found I had to use the reset physics on the 363 as the brakes would not release (from the start), but now the engine shuts down and will not...
I can't use it on routes it has been provided on because the signals are causing me get stopped constantly. I tried following them as street tram...
I have tried again using this 103 and it will not move even at start, I followed procedure to start it but it will not move at all. As usual...
It is doing the same as the 187 it does not drive, the cab is on and setup but it will not move. I am using it on as free roam placement on Bremen...
This locomotive will not work. I set the cab on, brakes on, cut in, pantograph up, mcb closed. Yet it cant take power. I restart the battery and...
I am trying to do services with the new 142 pack but I keep encountering a problem when I try to move after stopping at stations. The first thing...
That sorted it, cheers.
I have not encountered that yet but it sounds weird. Why do they bother getting the train if they can fly? Or are they semi mortal and decide they...
I am constantly getting stuck on Luzern because of other trains stopping across sections and getting stuck! I think it might be better if DTG find...
I think there are two at the ELR, there is one waiting restoration with a centre trailer that could go in 50455/50517 if I remember right. I...
I think it should have been a 104 instead of a 101. I have been told before that a 104 would simply sound the same as a 101 as the engines are...
I don't have any mods installed (unless that includes creator content) and I run through the steps and ended up doing a clean install to figure...
I found the recording of a 142 with original powertrain, I just hope the 142 in this DLC sounds as good. [MEDIA]
I followed all upgrade reinstall and patch procedures but it is constantly crashing all the time, it seems now I can't even get the full length of...
Every time I try to interact with AI trains on the [9] screen on Antelope Valley it causes TSW 4 to crash, this is often seeded as trains end up...
I tried that but it stops the brakes on the train behind the F7 from being applied.
I have been having problems when there is an F7 in the formation (not on this scenario) where the brakes will not allow the leading loco to...
Another loco not working is the MP15, the orange light comes on as soon as you key in and there is no power. Same startup procedure done as with...
How are you supposed to setup the F7 in trailing function? If I set the brake to cut out it applies the brake but if I cut it in and put in...
It is on, I have also tried switching it off and on again but it has had no effect.
Thanks for that, does having the brake handles in running reduce brake force?
Oh, that will be why. Thanks for letting me know about that issue with these locos. I am also unable to get the SD70ACe working as both screens...
I am trying to use together the two CN locos and two CR locos together in order of (CN GP38 - CN GP9 - CR SD40-2 - CR F7). I tried taking power on...
The train is running vacuum brakes as the MK1s I have are vac only (Spirit of Steam), I don't think there is a way to chose which hoses are...
I have been tinkering around with the free roam recently but I seem to have come across a but of a puzzling situation. The first occasion I had a...
Are your DLCs all checked in the DLC manager on Steam? [ATTACH] [ATTACH]
I believe it does, though these are less objectives so you won't get as many.
The only issue is some freight waggons that operate in pairs are unable to be shunted together as you can't connect the drawbar, it would be good...
What do you mean by coronas? Is this something represented by the transponder user interface or a trackside transponder unit?
What mode is actually the correct one to use on Luzern as well as Vorarlberg? Every time I try I get in the wrong mode and get speed limited when...
Mine is showing rather unusual, it is showing I do not own the same DLCs in the store but is downloading a further 18GB (which keeps pausing) and...
Those are exactly the addons I am missing, I have noticed others seem to be mentioning the same addons so I think it is definitely on the...
It happens with various trains spawning at various locations when I move using run, so it does not appear to be specific to a particular addon....
I am missing loads (mainly locomotive) but I can't use free roam as it crashes as soon as I place anything down.
I had the pre release version which was working fine but now when I am trying to place something on free roam if I try to move around TSW 4...
This was the Tiger I have been on (not my video though), could this coach have been hired for recordings for a 142? It would be more realistic...
I'm sure I remember another video taken on board a 142. It sounded like gear shifts on a first gen unit but with a whine like on a ZF 4HP on an...
Mine just updated at 6:28 PM but there is no DLC, I checked in the store and they are all showing as not owned.
I recently had a discussion about the engines on the class 142 and I suggested it would be difficult to source sound recordings as the only...
This should work but it hasn't worked for me as TSW 4 has updated and Steam has shown I do not own any DLC in TSW 4...
I just followed the process as highlighted in the pinned thread and it shows I own TSW 4 but I no longer own my previous DLC in TSW 3, Why do I...
That is the one, cheers.
I posted an image in my first post and that is what happened, I don't know if the default save format has changed since Windows updated but it...
Separate names with a comma.
