How do you find out station numbers? It says in the manual to use the two digit station ID followed by the time of departure but there is no two...
Thanks for showing that. Would that be the same as on a double header on a diesel gala, would it you just leave it in "Vac Pass" and just turn off...
So IRL if you have a 24 (vac only), 47 (dual), MK1s (vac in use) in that order, would the 47 be set to air passenger as the exhauster is not...
It is whatever the default setting is, I have not touched that, I didn't even know it had an auxiliary control as it would not work with the 463...
I was referring to the 10 minute threshold which is commonly deemed acceptable (except Japan where that is often less than a minute). I have had...
I never said I know it all and I don't know why you are having a go at me. I was asking because I didn't know, the information I have been given...
I have read the instructions in the troubleshooting guide and got nowhere, I followed the video tutorials and it still would not work, I asked...
With German stock being tightly restricted to technical information, how is this going to be possible to find such information for these units?...
AFB makes no difference to the power on the 401, it just changes the end the h fill is works so the brakes no longer fully release, holding the...
I have both keys on, cab on, yet it still does nothing, in the end where it does work there is no power and it acts just like the BR187 which...
2000Hz would just stop the train anyway how do I pass these on 10 and what is the acknowledgement indicator sign? It doesn't make sense if I have...
I am trying to use the BR401 and there is no function whatsoever! I followed the instruction startup process and it does not work. One end I hit...
This was within 120 sections on 1000HZ. Also, when speed drops from 150 to 120 there should be no PZB acknowledgement needed according to the...
It looks like 142050 somehow managed to sneak on the Provincial Leyland/SCG ID numbering list. While tinkering about with a bunch of BGs, a 20,...
T211r is the model of the Voith transmission, the Leyland engine is a TL11. I noticed there was an error in the numbering for the TL11 & SCG as I...
Doesn't one of the maps have PZB that require you to be under 45 either way but in 120 sections?
How do I know if an approaching PZB transmitter is VU1 (85/70/55KMH), VU2 (45KMH) or VUM (10KMH) application of speed restriction if the vehicle...
I seem to get black screen in the finished video despite the TSW (TSW prototype) box being selected as visible in OBS, it worked with TSW 3 along...
Shouldn't the brakes on the 363 still work if it is coupled to another two piped loco? Also, if this is causing the problem with an air starter...
I have not seen that tutorial, I will check it out tomorrow. Thanks for sharing. Edit: By the information that is not public information, I meant...
It was timetable mode but placed as if it was free roam, is that what is causing it not to restart?
I have watched the full PZB & German signal tutorial and the new signals are not covered.
I found I had to use the reset physics on the 363 as the brakes would not release (from the start), but now the engine shuts down and will not...
I can't use it on routes it has been provided on because the signals are causing me get stopped constantly. I tried following them as street tram...
I have tried again using this 103 and it will not move even at start, I followed procedure to start it but it will not move at all. As usual...
It is doing the same as the 187 it does not drive, the cab is on and setup but it will not move. I am using it on as free roam placement on Bremen...
This locomotive will not work. I set the cab on, brakes on, cut in, pantograph up, mcb closed. Yet it cant take power. I restart the battery and...
I am trying to do services with the new 142 pack but I keep encountering a problem when I try to move after stopping at stations. The first thing...
That sorted it, cheers.
I have not encountered that yet but it sounds weird. Why do they bother getting the train if they can fly? Or are they semi mortal and decide they...
I am constantly getting stuck on Luzern because of other trains stopping across sections and getting stuck! I think it might be better if DTG find...
I think there are two at the ELR, there is one waiting restoration with a centre trailer that could go in 50455/50517 if I remember right. I...
I think it should have been a 104 instead of a 101. I have been told before that a 104 would simply sound the same as a 101 as the engines are...
I don't have any mods installed (unless that includes creator content) and I run through the steps and ended up doing a clean install to figure...
I found the recording of a 142 with original powertrain, I just hope the 142 in this DLC sounds as good. [MEDIA]
I followed all upgrade reinstall and patch procedures but it is constantly crashing all the time, it seems now I can't even get the full length of...
Every time I try to interact with AI trains on the [9] screen on Antelope Valley it causes TSW 4 to crash, this is often seeded as trains end up...
I tried that but it stops the brakes on the train behind the F7 from being applied.
I have been having problems when there is an F7 in the formation (not on this scenario) where the brakes will not allow the leading loco to...
Another loco not working is the MP15, the orange light comes on as soon as you key in and there is no power. Same startup procedure done as with...
How are you supposed to setup the F7 in trailing function? If I set the brake to cut out it applies the brake but if I cut it in and put in...
It is on, I have also tried switching it off and on again but it has had no effect.
Thanks for that, does having the brake handles in running reduce brake force?
Oh, that will be why. Thanks for letting me know about that issue with these locos. I am also unable to get the SD70ACe working as both screens...
I am trying to use together the two CN locos and two CR locos together in order of (CN GP38 - CN GP9 - CR SD40-2 - CR F7). I tried taking power on...
The train is running vacuum brakes as the MK1s I have are vac only (Spirit of Steam), I don't think there is a way to chose which hoses are...
I have been tinkering around with the free roam recently but I seem to have come across a but of a puzzling situation. The first occasion I had a...
Are your DLCs all checked in the DLC manager on Steam? [ATTACH] [ATTACH]
I believe it does, though these are less objectives so you won't get as many.
The only issue is some freight waggons that operate in pairs are unable to be shunted together as you can't connect the drawbar, it would be good...
Separate names with a comma.
