I have the same, done the reset and that didn't solve anything.
I have this the same thing, it is in forward but the brake will not release all the way despite everything setup as normal.
How do I het off monitoring mode to change it if that is the problem?
I have pressed button 3 in the Enstellungen menu but it will not change, it instead remains on mode M.
I can find the MCBs to turn them on but I can't find the PZB mode selector.
It wouldn't let me change it at one point but then I left the Vectron to shunt with a G6 and when I got back on the Vectron it would let me change...
Is this supposed to be the same for the BR103? I keep getting told this is the same layout but the switch is not there in the BR103.
I am trying to change PZB mode in the menu but it will not change, how am I supposed to change to O?
I have tried it but it doesn't work
The signal is green and there is no alarm to acknowledge.
It is slamming the brakes on for passing a green signal on this route, I can't get a single timetable run completed.
The electric/rheostatic brake does nothing at zero speed, it will not hold the train.
What is the point in having the aggregates pack in the first place if using them in timetable mode stops the power on the locomotive from working...
I just bought the two Arosa aggregates and Bernialine and I can't get a timetable run completed in either. With Bernialine I get half way down...
The timetable modes can't go anywhere, it has you do a start on a hill but if you power on before releasing the brake it will not apply, if you...
I can't get past the signal at the passing loop just before Le Prese, it is showing a green aspect but as soon as I pass it the brakes are applied...
I can't code so I don't know how to do that.
I don't mean the CMD box, it constantly opens the warning box, pressing yes does nothing but open another.
I have tried installing something and got this "geomod4.exe" constantly opening Windows prompts over and over again, the only way to stop it is to...
I keep getting this after being on free roaming in timetable or free roam on empty map after setting more than two or three destinations, after...
That will just fail the mission or lose the timetable I am on. I have restarted new timetabled runs and it is the same thing not knowing what...
It is an iconic little local line, there were also a lot of engineering trains running with class 31s if you don't want to do passenger workings.
It only resets the brake release point though, this is a power issue.
That is not what I meant by that. On HSC there is a distance based signalling that lets the train behind come right up to the back if you stop for...
It ends up with the risk of running in to the train in front due to the signal system on that route. I have also found other locos don't warn you...
But the pantograph ended up going down anyway. How do you put it back up when the pantograph switch will not raise the pantograph?
After the train has shut down PZB release does nothing, pantograph is down and will not raise.
I have not been able to record anything in TSW 4 as OBS does not recognise the TSW window, I tried to find out how but it seems I need to add in...
I am not sure, I also tried it with a 425 over the same section and it happened again even pressing the acknowledge button several times.
I think so, I usually have all systems on.
It is the same on the UP GP38-2 it starts beeping on this one but slams the brakes on as soon as it starts beeping and will not release the brakes.
No mods & on timetable, there is no pcs light coming on either.
I am trying to drive the 403 on WB towards Essen, first the PZB goes off with no sign or signal, then it goes off a second time approaching white...
I have the same around Aachen station with the 403, I key in the cab but move forward but it just brakes automatically on a 1000 despite even...
This doesn't work, I have tried to set up the cab but it will not move after following the same procedure. It seems there is no way to tell which...
I am using the GP38-2 on HSC but at the point where the speed limit increases to 50 it randomly lost all brake pressure and stopped. After...
How do you fix this if it happens?
Thanks for the information
Is the formation designer something within the Epic editor or will it be an integral part of TSW 4?
How do you find out station numbers? It says in the manual to use the two digit station ID followed by the time of departure but there is no two...
Thanks for showing that. Would that be the same as on a double header on a diesel gala, would it you just leave it in "Vac Pass" and just turn off...
So IRL if you have a 24 (vac only), 47 (dual), MK1s (vac in use) in that order, would the 47 be set to air passenger as the exhauster is not...
It is whatever the default setting is, I have not touched that, I didn't even know it had an auxiliary control as it would not work with the 463...
I was referring to the 10 minute threshold which is commonly deemed acceptable (except Japan where that is often less than a minute). I have had...
I never said I know it all and I don't know why you are having a go at me. I was asking because I didn't know, the information I have been given...
I have read the instructions in the troubleshooting guide and got nowhere, I followed the video tutorials and it still would not work, I asked...
With German stock being tightly restricted to technical information, how is this going to be possible to find such information for these units?...
AFB makes no difference to the power on the 401, it just changes the end the h fill is works so the brakes no longer fully release, holding the...
I have both keys on, cab on, yet it still does nothing, in the end where it does work there is no power and it acts just like the BR187 which...
2000Hz would just stop the train anyway how do I pass these on 10 and what is the acknowledgement indicator sign? It doesn't make sense if I have...
Separate names with a comma.