Sorry if this has been said before, I've had a flick through but can't find anything. I have done 2 different diagrams now on an 800 series train and both times after around 4 stops the train gives up. Faults are disabled. When I'm ready to go I put the brake to 0 and give power but the BC dial remains at 1.0 and can't move. The engines are spoiling up but can't get the brake off 1.0.l to move. Any help appreciated. Pic attached.
When this happened to me, it turned out I'd accidentally pressed the brake hold, which is controlled by the left trigger on the Xbox controller. Pressing it again should release the brakes again. I presume it'd be L2 on PS5
