So as the title suggests, I've been having some trouble with the ACSES and ATC systems at stop signals. Now before I say anything, I do consider this as a bug and not as a feature. So whenever I am running a train to Boston from Providence (specifically service 2164) ill usually get to each station fine and on time, no real signal issues yet. However, the problem starts when approaching east cove limits, usually the signal progression goes from an approach to restricted, however even with a restricted signal the ADU display's the signal as a stop signal. This shouldn't be happening as the signal does not indicated an absolute stop signal, but a restricting. The second issue I am having is with the ADU when the signal is dropped. Usually in real world operation to my knowledge, when approaching a stop signal with both safety systems enabled, you will have a restricted cab signal on your ADU, and your speed and time until penalty will start counting down until you stop. One thing that is missing here is the speed counting down, and sometimes even the time until penalty messes up and doesn't display anything. If someone could help me with this it would be much appreciated
