1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Aws

Discussion in 'Xbox Discussion' started by Mikewhitnall08, Sep 13, 2020.

  1. Mikewhitnall08

    Mikewhitnall08 New Member

    Joined:
    Aug 2, 2018
    Messages:
    8
    Likes Received:
    5
    How does it work or does it even work thanks
     
  2. breblimator

    breblimator Well-Known Member

    Joined:
    May 1, 2019
    Messages:
    894
    Likes Received:
    561
  3. L89

    L89 Active Member

    Joined:
    Apr 8, 2020
    Messages:
    389
    Likes Received:
    209
    If it makes a bad noise, acknowledge it and pay closer attention to speed and signals. That basically is how I interpret it. :)
     
    • Like Like x 1
  4. Northerner

    Northerner Well-Known Member

    Joined:
    Jun 16, 2020
    Messages:
    283
    Likes Received:
    297
    When it sounds a continuous horn or buzzing noise acknowledge it, this sounds at the approach to yellow or red signal and also in advance of some speed limits where there is a large decrease. You do not need to do anything when it rings a bell sound for about a second, that just means that the signal is clear.
     
    • Helpful Helpful x 1
  5. Mikewhitnall08

    Mikewhitnall08 New Member

    Joined:
    Aug 2, 2018
    Messages:
    8
    Likes Received:
    5
    But it isnt making any sounds ?
     
  6. breblimator

    breblimator Well-Known Member

    Joined:
    May 1, 2019
    Messages:
    894
    Likes Received:
    561
    First, You have to turn it ON :)

    It works at designated points on the route. You will see some kind of slats between the rails.
     
  7. Northerner

    Northerner Well-Known Member

    Joined:
    Jun 16, 2020
    Messages:
    283
    Likes Received:
    297
    Yeah you need to turn it on. Which train are you trying to use it on as the switch is in a different place on each train?
     
  8. Mikewhitnall08

    Mikewhitnall08 New Member

    Joined:
    Aug 2, 2018
    Messages:
    8
    Likes Received:
    5
    Using the 166 and class 377
     
  9. breblimator

    breblimator Well-Known Member

    Joined:
    May 1, 2019
    Messages:
    894
    Likes Received:
    561
  10. Northerner

    Northerner Well-Known Member

    Joined:
    Jun 16, 2020
    Messages:
    283
    Likes Received:
    297
    On the 166 the AWS is a switch on the fuse board behind the driver and on the 377 it's one of the switches on the second man's side of the cab.
     
  11. Teza

    Teza Member

    Joined:
    Aug 27, 2020
    Messages:
    70
    Likes Received:
    28
    Yes on the 377 you will see a set of round metal like key holes on the top of the second man's side next to the window
    too the right of where you are, a key will turn them as you point at them, there is more than one to turn on, if you want them all on
    AWS, DSD,. Vigilance, DRA
    best to turn them on before you turn Master Key On or the AWS alarms will start and you will need to jump in the seat to press B

    Xbox manual..
    https://storage.googleapis.com/medi...d East Coastway Driver's Manual Xbox - EN.pdf
     

Share This Page