1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

PlayStation Blurred Wheels.

Discussion in 'Technical Reports' started by nighthawkf360, Mar 7, 2021.

  1. nighthawkf360

    nighthawkf360 New Member

    Joined:
    May 9, 2020
    Messages:
    9
    Likes Received:
    16
    Hi all, I'm wondering if anyone able to help me with a glitch I'm experiencing on TSW2 on PS5.

    I'm getting constant distortion around the wheels when in motion (see attached) which at its worst will blur out the wheels entirely.

    This has been a constant issue for me across PS4, PS4 Pro and now on PS5 too. I get this issue on every locomotive and rolling stock, on every route and in any time/weather combination.

    I'm not a PC gamer and I'd previously put it down to the power of the PS4/PS4 Pro but even with the bump in performance on a PS5 it's still a persistent issue.

    These are the steps I've taken to attempt to rectify it;
    • Decreasing the resolution all of the way down to 720p.
    • Recalibrating HDR.
    • Disabled HDR.
    • Adjusting display safe area.
    • Tested on three different TVs.
    • Tested on a 50Hz and 100Hz display panel.
    None of the above steps have resolved the issue.

    Does anybody have any suggestions or is this an issue with the game?

    Any help would be appreciated!

    Thank you in advance and stay safe everyone!

    IMG_0894.jpeg IMG_0895.jpeg IMG_0896.jpeg
     
  2. KyleL

    KyleL Well-Known Member

    Joined:
    Apr 7, 2020
    Messages:
    988
    Likes Received:
    986
    You need to turn off motion blur in the settings
     
    • Like Like x 2
  3. solicitr

    solicitr Well-Known Member

    Joined:
    Jun 20, 2020
    Messages:
    4,759
    Likes Received:
    6,841
    That's a fault with Unreal Engine- it only does linear motion blur, things that should have rotary motion blur get all weird and funky. Solution is to switch off motion blur in Settings. On PC it can be disabled permanently in the engine.ini file.
     
    • Like Like x 1
  4. nighthawkf360

    nighthawkf360 New Member

    Joined:
    May 9, 2020
    Messages:
    9
    Likes Received:
    16
    Thank you all for your advice! I hadn't thought of turning off motion blur, I have now and the problem is solved. I was expecting it to be something far more complicated hence all of my troubleshooting. Thanks again!
     
    • Like Like x 1

Share This Page