PC Boston Sprinter #521: "train Appears To Be Off Path" But Isn't

Discussion in 'TSW Troubleshooting & Issues Discussion' started by phil.elliott, Nov 16, 2022.

  1. phil.elliott

    phil.elliott Well-Known Member

    Joined:
    Aug 26, 2020
    Messages:
    478
    Likes Received:
    1,024
    So playing one of the services in Boston Sprinter - MBTA Worcester #521 (Depot - Boston)

    I follow the correct path for about half of the total distance, signals all fine, and changing points where needed. The path ahead is blue on the map.

    Until I hit a red signal, which normally would require me to wait - but in this case contacting the signaller tells me "Denied: Your train appears to be off path" - except it isn't, as shown by the screenshot.

    Any ideas? 20221116204928_1.jpg
     
  2. DeltaFOX2k7

    DeltaFOX2k7 Well-Known Member

    Joined:
    Jun 20, 2020
    Messages:
    1,034
    Likes Received:
    1,271
    The signaller does not need to be contacted in #521. You should enter your block completely so that you do not block the train behind you. The signal will automatically turn green at 16:37:30.
     
  3. phil.elliott

    phil.elliott Well-Known Member

    Joined:
    Aug 26, 2020
    Messages:
    478
    Likes Received:
    1,024
    Yes, that was what I assumed the first three times I tried the scenario - I only took this picture to show the blue path ahead, and while I was looking for help the trrain behind moved up.

    I did actually find the cause of the problem - the train behind me in the image above was stopped very close to an earlier junction that I passed, which looked odd (since all other depot trains that are stationary are backed well into their siding lane). I checked this by jumping into that train and taking over the service, at which point the AI took over #521 and proceeded without issue.

    So I discovered a workaround, which I'll post here in case anybody else searches: enter the area on foot at 16:20 and go sit in the #521 service. The "stuck" train noted above starts in the correct place, moves off and continues through the junction ahead, not stopping where it does if you load into the #521 service from the timetable.

    This means it is well out of the way and ahead of you when the #521 service starts at 16:24 and you can proceed to completion without any further issues.
     
  4. larryg

    larryg New Member

    Joined:
    Jan 26, 2022
    Messages:
    6
    Likes Received:
    1
     
  5. larryg

    larryg New Member

    Joined:
    Jan 26, 2022
    Messages:
    6
    Likes Received:
    1
    I had that problem for months and I reported it and was trying to figure out what the problem was. That’s great you found a workaround.
     
    • Like Like x 1

Share This Page