Firstly, I'll start by saying that this is probably going to be my favorite route in TSW. I've had a lot of fun driving the various services and trains available. The route is constantly changing throughout multiple runs with freight wagons being dropped off in sidings and 363s scattered about the route. It's fantastic! Although, there are a few bugs/issues I've noticed whilst playing: 425 Issues The white head/red tail marker lights aren't very errrm, white or red. The red looks more orange and the white you can barely see at all. When SIFA is enabled, the SIFA light remains lit in the cab. Should it not be lit when disabled, like other stock in TSW, and then unlit when enabled? (Only then becoming lit when SIFA needs acknowledging) There are no PZB sounds when operating the PZB switches, not sure if this is prototypical of the real unit or not. Route issues Whilst driving RE14673, the repeater signals around KM 43.4 didn't show the upcoming 20kph signal speed for entering Bremen Hbf, nor was there any warning of it at the distance signal. There's a missing 120kph warning board at KM 39.4 on the line heading toward Bremen. I'm finding there's quite a large amount of stuttering in places, not sure if that's normal for a first run as maybe the route gets cached.
When it comes to the PZB sounds, the "Wachsam" (Acknowledge) should always make a buzz when pressed and "Befehl" (Override) should make a buzz when pressed below 40 kph, but they don't make any noise in the game, so these are faulty. The "Frei" (Release) button behaves better, but not entirely realistic. It is supposed to make a noise when you actually release yourself from an ongoing surveillance, bei it 45 kph (70 and 85 indicators blinking) or 85 kph (85 kph indicator blinking). This is only possible when neither the 1000 Hz nor the 500 Hz indicator is lit up. In the game, it does make a noise when releasing from a "restrictive" 45 kph surveillance, but not when releasing from 85 kph.
