I'll post the bugs that I found on the newly released Tharandter Rampe here.[PS4] - When u acknowledge SIFA it takes longer then usual till SIFA goes off - When u want to look out of the window the camera stays in the cab(shunting control) - Poor FPS in Dresden Hbf - Game crashed with BR 612 when i left Dresden Hbf EDIT - AI does not tilting or only 1 carriage tilts - Dosto's does has their headlights & taillights on - Missing Overhead Wires on sidings - Railway crossings missing (Kleinschirma f.e.) - SIFA does not work when u enable it on the dosto - Dosto headlights does not work correctly [same for AI] - PZB trips when u pass a [red]signal [shunting] - Weirdly missing OHW/ services that needs to be done with BR612
Some more things, I noticed: - Lots of missing level crossings - I tried a BR442-stabling in Freiberg. It took me in a non-electrified siding, where I could not reach my destination due to loss of power (no overhead) - some stabling-moves that are in 2 parts, are named exactly the same (always named part 1) (saw this at the RP BR 185.6) - the RP BR 185.6 does not sound right I think (BR101 sounds?). It should not have any "Türfreigabe"-sounds as it is a freight locomotive. A pity, you did not use the sounds from the MRCE BR 185.5 from DRA. - LZB not working on the 185.6 despite the switch being usable - a pity, the red BR363 cannot be used to sub in for the blue one - BR 112 again doing freight trains (but only 7) - BR1442 from RT subbing in in services, where it should not (I would not mind if it would switch in for another similar train, but it is completely wrong in that time period, and it was already explained, that it is a bug) - the new cab-car is showing with the VVO-logos in the preview in the selection screen
Today my first TSW 2 game failed on my PS5. The game is slowing down near the city of Dresden. Sifa in Dosto driving car does not work.
Yeah. I got it working in the end. Turns out if you release the train brakes before putting the reverser into forward it puts it in traction lock. Don't know whether it's meant to do so
Dont forget to set door closing switch to "lock all", when I forgot it I could only get 1% of traction power
Many real life br185 operators have door operations installed, as those locos can be used for passenger service as well. I don’t know about railpool, but as they rent their stock out and want to be as flexible as possible, I would assume so. I have not played the game yet, you should check if you find a door selector switch on the rear panel and if it is set to „0“. That’s how it is done in the real unit.
Yeah I saw that too last night while driving the Railpool 185. I have experienced one crash while walking around Dresden station, while I was looking at a 363 that was sitting in the sidings with no livery. Just yellow autocouplings. I have never used the livery editor so no idea how it happened. I am also experiencing what seems to be a hanging brake on the Dosto stock. I first experienced it on Rapid Transit a few nights ago while driving the 182, it was the same driving from the cab car. I was experiencing the same on this route last night driving the 143 and from the cab car. I don't know if it's a hanging brake or the running sounds on the Dostos but something seems off with them.
You guys have the issue with the dostos middle lights not shutting off too? I have it on series S so Idk if it's on other consoles.
Can somebody help me: at some point of my journey (mostly after my firtst stop) i only can get 1 percent traction power. How can I fix that.
Today I ride a motor train. I found an interesting security fuse. The train will not start unless the door switch is in the Lock all position.
On Fast Line to Freiberg another unit most be coupled. But somebody should remove the cape from the coupler.
That's not a bug. The coupler bag is randomly applied as it does in real world (they have them on also when not in winter). The front of it opens when you approach the coupler with a fitting counterpart (another 612) and you can couple as needed.