Lots and lots of bugs, found my first one about two seconds into the game. can I just have a normal, bug-free release for once? (no). anyway, here's the list so far (timestamped too) [11:23 AM] 1. AC4400 gage lights and number lights do not function [11:24 AM] 2. SD40-2 number lights appear on when headlights are turned on [11:24 AM] 3. crossing gates at potash(I think??) do not light up (checked during route intro) [11:25 AM] 4. random highway audio plays when spawning or switching cameras or just at random, even when no cars are present or when there are no roads in sight. it's also really really loud and glitchy. [11:25 AM] 5. AC4400CW rides too high on the tracks (see the bent coupler?) [11:29 AM] 6. crossing gates don't raise arms or shut off when no trains are present (or at least none I've seen) [11:33 AM] 7. EOTD emergency switch glitches through it's cover on AC4400CW 8. wheels don't make any noise when crossing track joints at high speed and are too quiet, barely audible, IRL they are really loud. (this only happens with the covered hopper cars and the AC4400CW, the open hoppers are fine for the most part) [11:45 AM] 9. SD40-2 bell clapper is animated incorrectly, the top of the clapper moves, not the bottom (look at it and you'll see what I mean) [11:45 AM] 10. AC4400CW bell clapper is broken, it doesn't move [11:46] 11. many crossing gates have no audio 12. handrails merge on the AC4400 13. some mileposts have numbers sticking out the end like this [12:08] 14. loading saves doesn't save airbrake changes for AC4400CW (tested only on tank car set out scenario). there may be other problems as well, I would recommend doing some extensive tests. 15. LDP-46 part one and two: one pair of AC4400CWs won't have any engine sound [12:25 PM] 16: AC4400CW reverser doesn't make noise when switching to and from the reverse position. sand, horn, and bell buttons don't make noise when pressed (sand, bell, and horn audio plays, just not the button noise) [12:26 PM] 17.when rendering in a AC4400CW, sometimes engine sounds will not spawn with it. fan audio still plays though. 18. both AC4400CWs on LDP-46 part one have their control, engine run, and gen. field switches to on. only one of them should have the switches on, the other should be set up as a regular trailing loco. 19. wheels and brakes on the rear truck of the AC4400CW don't move 20. SD40-2 wiper movement is slow and glitchy [3:24 PM] 21. SD40-2 floating throttle piece [3:25 PM] [3:26 PM] 22. SD40-2 AC on the roof but no AC modeled inside on the roof of the cab like on the UP GP38-2 [3:26 PM] 23. SD40-2 manual wipe levers don't work unless wipers have been turned on at least once. 24. AC4400CW: window texture glitches thats all for now.