Fog Performance

Discussion in 'TSW General Discussion' started by dangerousdave, Sep 7, 2022.

  1. Is it just me or does fog really hurt performance? Did a sehs Tgv run on a clear day @60fps all the way. then another run in the fog @30fps (mostly)
     
    • Like Like x 1
  2. Princess Entrapta

    Princess Entrapta Well-Known Member

    Joined:
    Jul 23, 2021
    Messages:
    2,701
    Likes Received:
    3,437
    Pretty much, it's a MASSIVE performance hit right now.

    It's almost like they never once during the process tested anything with the weather switched on.
     
  3. Is it volumetric fog?
     
  4. On the German route I was getting between 15-25 fps.

    I get better with cyberpunk @4k with raytracing.
     
    • Like Like x 1
  5. Princess Entrapta

    Princess Entrapta Well-Known Member

    Joined:
    Jul 23, 2021
    Messages:
    2,701
    Likes Received:
    3,437
    I would note with regards to Cyberpunk, I drop below 60 when I bump that game's volumetric fog from medium to high. One does wonder why TSW3's is causing such a hit.
     
  6. jeremy#2905

    jeremy#2905 Member

    Joined:
    Jun 19, 2021
    Messages:
    60
    Likes Received:
    82
    Yeah the fog gets me on Kassel Wurzburg. My runs will usually start at around 80-100 and drop to 30 once the fog rolls in.
     
    • Like Like x 1
  7. bart2day

    bart2day Well-Known Member

    Joined:
    Jul 24, 2018
    Messages:
    885
    Likes Received:
    2,547
    80-100 FPS?!!! Do you have a NASA grade computer? Would love to know your specs to get that. Even Sam with his GTX3090 doesn't get that.
     
    • Like Like x 2
  8. Princess Entrapta

    Princess Entrapta Well-Known Member

    Joined:
    Jul 23, 2021
    Messages:
    2,701
    Likes Received:
    3,437
    Probably quite achievable with the right settings and a current gen graphics card. I run several games at around 120-140 with their graphics maxed, and even CP77 with everything on high and 1440p at around 70. On a £960 laptop. I imagine I could get TSW3 running in that range in 1080p mode with a few settings dialled down.
     
    • Like Like x 1
  9. I'm not sure the fog in tsw is volumetric? I thought volumetric was like where you have patches of fog, so the volume of the fog changes as you pass thru it.

    With Cyberpunk I have everything on ultra. Normally get around 50-60fps if I turn on rt then I have to use dlss favouring quality to get around 35fps.
     
  10. At 1080 I get high frame rates with everything on ultra (without fog) that's with a 3070 and i5 12600kf although the i5 is locked at 5ghz.
     
  11. jeremy#2905

    jeremy#2905 Member

    Joined:
    Jun 19, 2021
    Messages:
    60
    Likes Received:
    82
    I'm running a 1080 ti, 9900kf, 32 gb ram, with the game on a 1 tb nvme ssd, running maximum settings 120% screen percentage. I also only play at 1080p so that might be part of the reason I get such high FPS.
     
    • Like Like x 2
  12. Princess Entrapta

    Princess Entrapta Well-Known Member

    Joined:
    Jul 23, 2021
    Messages:
    2,701
    Likes Received:
    3,437
    FPS>resolution any day of the week.
    For a happy medium I will continue to recommend DTG looking into incorporating FSR 2.0, as it's open-source and compatible with any graphics card, including the ones in the consoles.
     
    • Helpful Helpful x 1
  13. It would seem the problem was my own doing. When I updated my bios the other day it re enabled my e cores! E cores = poor gaming performance.
     

Share This Page