I thought DTG had fixed the Signalling problems on this route? Going from Mainz Hbf to Koblenz The signal at the end of the platform shows a 60 Kph max speed - the F3 Hud shows the train going thru a 50 Kph crossover A few kms out after passing under the Flyover the Vorsignal Signal cannot make its mind up if it should show Caution or Clear I gave up at that point Both the MainContent.ap and the Route files show a date of 01/10/2021 so should be up to date. Peter
I just tried it (it is a fair point on the 60 but the 50 is marked on the hud - while not perfect it's not the worst bugs - however I tried a quick drive from Mainz towards Koblenz and those second signals showed green for me? In my case I only ever mentioned they were looked at and improved upon (I did assume that some would have slipped through - but equally I wasn't the one fixing them, but as far as I know many signals were replaced)
I just did another QD and the same happened. So I deleted the Route Folder and reacquired a new copy thru Steam and that works perfectly Not sure why that did not work the first time The conflict between the Signal and the HUD is irritating as it could catch you out. Might look at seeing it there is a way to modify the signal info Thanks atomicdanny Peter
