Hello, I had first posted this in the feedback forum, it now realize it better belongs here. I bought the Semmeringbahn route in the current sale and am having a hard time getting the OBB 1116 to work. I’ve used a lot of German locomotives without seeing these issues. Safety systems are disabled, AFB is in use: - with some snow on the ground I couldn’t apply more than 60% throttle or the wheels would slip. Sand didn’t help. - it seems to require an odd amount of throttle on a 2.5% downhill grade? I struggled to maintain 60 km/h at 50% throttle, almost like a brake was stuck on? I did double check that all brakes (including the parking brake) were released. - several times along the way the train would just glide to a halt, even though brakes weren’t applied that I could see and it looked like power was still being applied. After stopping I could reapply power, it would show an increasing kN value, but the train wouldn’t move anywhere. In both cases after some combination of full brakes, reapplying throttle, disabling and re-enabling AFB, it would start moving. I felt like I was searching for a cheat code and am still not quite sure what I did to get it moving again. The last point is very possibly user error, but so far I’m not having a good time with this one. Thanks for any help. The route itself is beautiful and I’d like to be able to enjoy running it.
